This page was exported from IT certification exam materials [ http://blog.dumpleader.com ] Export date:Fri Jan 31 1:46:33 2025 / +0000 GMT ___________________________________________________ Title: [Jun-2022] 300-710 Free Sample Questions to Practice One Year Update [Q65-Q83] --------------------------------------------------- [Jun-2022] 300-710 Free Sample Questions to Practice One Year Update Download 300-710 exam with Cisco 300-710 Real Exam Questions Basic Exam Profile Before moving any further, it is necessary to know more about the exam structure. On a general basis, it lasts for 90 minutes, and the dominating question format is multiple-choice. The sum of the registration fee is $300 and will be paid as a voucher. There is not much information revealed about passing grades. But the fact that the certification you gain is valid for three years from the date of passing the test. To enjoy the benefits of your certification beyond that, you will have to fulfill the recertification criteria set by the vendor. Presently, 300-710 is available in English and Japanese languages. The entire onus of conducting the exam globally is on Pearson VUE. It delivers the test via online and offline proctoring facilities. Cisco SNCF 300-710 Practice Test Questions, Cisco SNCF 300-710 Exam Practice Test Questions The Securing Networks with Cisco Firepower (300-710 SNCF) exam assesses the candidates' knowledge of Cisco Firepower Threat Defense as well as Firepower 7000 & 8000 Series virtual appliances, including integrations, policy configurations, deployments, management & troubleshooting. The main focus of this test is to equip the professionals with sufficient expertise related to implementing the advanced Next-Generation Intrusion Prevention System (NGIPS) and Next-Generation Firewall (NGFW) features. This encompasses one's competency in file type detection, network intelligence, deep packet inspection, and network-based malware detection. The 300-710 exam is associated with two Cisco certifications, namely Cisco Certified Specialist – Network Security Firepower and CCNP Security. Job Prospects & Salary for 300-710 Passers Those who manage to earn either the Cisco Certified Specialist - Network Security Firepower or the CCNP Security designations can opt for a wide range of careers such as: Network Security Analyst;Information Technology (IT) Support Specialist.Security Administrator, IT;Security Engineer;Director, IT Security;Network Security Engineer;Systems Architect;Security Manager, IT;Information Security Analyst; Note that each of these job roles comes with massive pay. For instance, Payscale reveals that the average annual income of a Security Administrator, IT is about $67k and for an Information Security Analyst this figure rises to around $73k yearly. A seasoned Cyber Security Analyst can make as much as $117k a year while a Security Manager, IT can earn as high as $148k. The pay per annum for a Director, IT Security is between $81k and $151k, while the remuneration range for an Information Security Engineer is between $66k and $134k. The average median salary for a Network Security Analyst is slightly more than $72k whereas for a Security Architect, IT the figure rises up to almost $125k. To know more, a Security Engineer can earn a maximum of $135k per annum while the income of a Network Security Engineer can reach peaks of $127k. The income range for a Systems Architect is between $69k and $163k whereas an Information Technology (IT) Support Specialist makes anywhere between $36k and $74k a year. Well, if you are still doubting the decision to follow the aforementioned Cisco validations, then these high monetary figures will surely convince you to do so.   QUESTION 65Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)  dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.  reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and reputation, and file lists  network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and origin/destination country  network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security zones and origin/destination country  reputation-based objects, such as URL categories Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/reusable_objects.html#ID-2243-00000414QUESTION 66What are the minimum requirements to deploy a managed device inline?  inline interfaces, security zones, MTU, and mode  passive interface, MTU, and mode  inline interfaces, MTU, and mode  passive interface, security zone, MTU, and mode Reference:https://www.cisco.com/c/en/us/td/docs/security/firepower/650/configuration/guide/fpmc-config- guide-v65/ips_device_deployments_and_configuration.htmlQUESTION 67Which Cisco Advanced Malware Protection for Endpoints policy is used only for monitoring endpoint actively?  Windows domain controller  audit  triage  protection Reference:https://www.cisco.com/c/en/us/support/docs/security/amp-endpoints/214933-amp-for-endpoints- deployment-methodology.htmlQUESTION 68On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?  transparent inline mode  TAP mode  strict TCP enforcement  propagate link state QUESTION 69Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high- availability?  configure high-availability resume  configure high-availability disable  system support network-options  configure high-availability suspend Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/firepower_threat_defense_high_availability.htmlQUESTION 70Which two packet captures does the FTD LINA engine support? (Choose two.)  Layer 7 network ID  source IP  application ID  dynamic firewall importing  protocol Reference: https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212474-working-with-firepower-threat-defense-f.htmlQUESTION 71A network security engineer must replace a faulty Cisco FTD device in a high availability pair. Which action must be taken while replacing the faulty unit?  Shut down the Cisco FMC before powering up the replacement unit.  Ensure that the faulty Cisco FTD device remains registered to the Cisco FMC.  Unregister the faulty Cisco FTD device from the Cisco FMC  Shut down the active Cisco FTD device before powering up the replacement unit. QUESTION 72With Cisco FTD software, which interface mode must be configured to passively receive traffic that passes through the appliance?  ERSPAN  IPS-only  firewall  tap Reference:v64/interface_overview_for_firepower_threat_defense.htmlQUESTION 73An engineer must configure a Cisco FMC dashboard in a child domain. Which action must be taken so that the dashboard is visible to the parent domain?  Add a separate tab.  Adjust policy inheritance settings.  Add a separate widget.  Create a copy of the dashboard. QUESTION 74What is the maximum bit size that Cisco FMC supports for HTTPS certificates?  1024  8192  4096  2048 Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/system_configuration.htmlQUESTION 75Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)  BGPv6  ECMP with up to three equal cost paths across multiple interfaces  ECMP with up to three equal cost paths across a single interface  BGPv4 in transparent firewall mode  BGPv4 with nonstop forwarding Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guide-v601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000eQUESTION 76A security engineer is configuring an Access Control Policy for multiple branch locations These locations share a common rule set and utilize a network object called INSIDE_NET which contains the locally significant internal network subnets at each location What technique will retain the policy consistency at each location but allow only the locally significant network subnet within the applicable rules?  utilizing policy inheritance  utilizing a dynamic ACP that updates from Cisco Talos  creating a unique ACP per device  creating an ACP with an INSIDE_NET network object and object overrides QUESTION 77With Cisco Firepower Threat Defense software, which interface mode must be configured to passively receive traffic that passes through the appliance?  routed  passive  inline set  inline tap QUESTION 78Which report template field format is available in Cisco FMC?  box lever chart  arrow chart  bar chart  benchmark chart QUESTION 79An engineer is attempting to add a new FTD device to their FMC behind a NAT device with a NAT ID of ACME001 and a password of Cisco388267669. Which command set must be used in order to accomplish this?  configure manager add ACME001 <registration key> <FMC IP>  configure manager add <FMC IP> ACME0O1 <registration key>  configure manager add DONTRESOLVE <FMC IP> AMCE001 <registration key>  configure manager add <FMC IP> registration key> ACME001 Reference:https://www.cisco.com/c/en/us/support/docs/security/firesight-management-center/118596-configure-firesight-00.htmlQUESTION 80Which two deployment types support high availability? (Choose two.)  transparent  routed  clustered  intra-chassis multi-instance  virtual appliance in public cloud Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/firepower_threat_defense_high_availability.htmlQUESTION 81A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?  by leveraging the ARP to direct traffic through the firewall  by assigning an inline set interface  by using a BVI and create a BVI IP address in the same subnet as the user segment  by bypassing protocol inspection by leveraging pre-filter rules Explanationhttps://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transpQUESTION 82An engineer is attempting to create a new dashboard within the Cisco FMC to have a single view with widgets from many of the other dashboards. The goal is to have a mixture of threat and security related widgets along with Cisco Firepower device health information Which two widgets must be configured to provide this information? (Choose two.)  Intrusion Events  Correlation Information  Appliance Status  Current Sessions  Network Compliance QUESTION 83What is the advantage of having Cisco Firepower devices send events to Cisco Threat Response via the security services exchange portal directly as opposed to using syslog?  All types of Cisco Firepower devices are supported.  An on-premises proxy server does not need to be set up and maintained.  Cisco Firepower devices do not need to be connected to the Internet.  Supports all devices that are running supported versions of Cisco Firepower.  Loading … Real exam questions are provided for CCNP Security tests, which can make sure you 100% pass: https://www.dumpleader.com/300-710_exam.html --------------------------------------------------- Images: https://blog.dumpleader.com/wp-content/plugins/watu/loading.gif https://blog.dumpleader.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-06-12 16:05:59 Post date GMT: 2022-06-12 16:05:59 Post modified date: 2022-06-12 16:05:59 Post modified date GMT: 2022-06-12 16:05:59