NO.16 Drag the correct protocols from the left to their appropriate area on the topology.

NO.17 A customer considers a new HPE ProLiant DL380 Gen10 as a hardware platform for their application and requires maximum physical security.
For each security-related server components, identify whether it needs to be ordered separately, or whether it is included as part of the server solution.

NO.18 Match each customer data center architecture to its network topology.

NO.19 A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?

NO.20 Indicate whether each management feature manages or monitors a single system or multiple systems.

NO.21 A customer requests a quote for an HPE storage solution that meets these requirements
* fully redundant dual-controller storage array with no single points of failure
* 1 Gb or 10 Gb ISCSI connectivity
* at least four host-facing ISCSI ports
* capable of expanding usable capacity in small increments of one-to-two disks Which HPE storage solution should be proposed?

NO.22 A customer has redundant SAN fabrics with a single HPE SN6000B 16 GB 48-port.24 SAN switch in each fabric. They plan to expand their virtualization environment by adding two HPE DL360s and an MSA 2042. Each DL360 will connect to the fabric via dual port 16 Gbps FC HBAs, and the MSA 2042 will connect with four FC Ports. The 24 ports on each switch are currently In use for other applications.
How many additional Port on demand licenses must be customer purchase for each switch if they redundantly connect all the new FC HBA ports to their existing SN600B switches?

NO.23 Match the customer requirement to the appropriate HPE storage solution.

NO.24 A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
Support for Multi Chassis Link Aggregation in an active-active mode.
The control plane must not be a single point of failure.
Rapid Fail-over. Unified Management.
They require a maximum of two switches per stack.
Which stacking technology meets the customer’s requirements?

NO.25 Which protocol should be used to access an exported directory on a network-attached storage device?

NO.26 You are installing a DL385 GEN10 LFF server at a customer site. The customer has a P8i6i-a RAID controller in the host After installing the provided 8 LFF disks in the front drive Days, you realize that the order also included two more SFF drives for the OS to boot from, but there are no SFF drive slots in the server, because it shipped from the factory.
Which action must be performed to finish the installation?

NO.27 A customer is planning to purchase new MPE rack-mount servers for their data center. The customer has an existtm storage environment and wants to minimize required rack space and local storage.
Which HPE server should they install?

NO.28 Match each adapter to its characteristic.

NO.29 Match the HPE Tool with its use case. Select all that apply.

NO.30 A customer requires a management solution that will provide email notifications if hardware errors occur on their servers. Which management solution provides this functionality?

NO.31 A solution integrator is installing new equipment to the rack.
Click the recommended location for HPE R/T3000 Extended Runtime Module.
Hot Area:

NO.32 A customer requires five HPE ProLiant servers that will be mounted in a rack and shipped from site to site All servers must be online within an hour of site arrival Which feature will ensure that the servers win be available to the business if travel motion has damaged a DIMM?

NO.33 A customer has an ESXi server in a branch office They need to perform backups locally. The local backups must be replicated to the main data center with built-in deduplication
What should the customer install at the branch office?

NO.34 What is the most important difference between an HPE ProLiant DL380 Gen10 server and an HPE ProLiant DL385 Gen10 server?

NO.35 A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

NO.36 Match the Networking Product Family to the appropriate use case: