[2023] NSE7_EFW-6.4 Dumps are Available for Instant Access [Q26-Q48]

4/5 - (2 votes)

[2023] NSE7_EFW-6.4 Dumps are Available for Instant Access

Valid NSE7_EFW-6.4 Dumps for Helping Passing NSE7_EFW-6.4 Exam!

The Fortinet NSE7_EFW-6.4 Certification Exam is a comprehensive exam that tests the knowledge and skills of IT professionals on the latest enterprise firewall technology. This certification is an excellent way for professionals to validate their skills and enhance their knowledge in the field of network security. Passing the exam can help professionals advance their careers and demonstrate their expertise in enterprise firewall technology.

The Fortinet NSE7_EFW-6.4 Exam is a comprehensive test that covers various aspects of network security, including application control, network intrusion prevention, web filtering, antivirus, and exploit prevention. The exam is conducted in a multiple-choice format, and candidates must answer all the questions within the allocated time. The exam is proctored, which means that a supervisor monitors candidates during the test. The candidate must score at least 70% to pass the exam.

NO.26 View theexhibit, which contains the output of diagnose sys session stat, and then answer the question below.

Which statements are correct regarding the output shown? (Choose two.)

There are 0 ephemeral sessions.

All the sessions in the session table areTCP sessions.

No sessions have been deleted because of memory pages exhaustion.

There are 166 TCP sessions waiting to complete the three-way handshake.

NO.27 Refer to the exhibit, which shows a partial routing table.

Assuming all the appropriate firewall policies are configured, which two pings will FortiGate route? (Choose two.)

Source IP address: 10.1.0.10. Destination IP address: 10.64.1.52

Source IPaddress: 10.72.3.52. Destination IP address: 10.1.0.254

Source IPaddress: 10.10.4.24, Destination IPaddress: 10.72.3.20

Source IPaddress: 10.73.9.10, Destination IPaddress: 10.72.3.15

NO.28 View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.

Which statements about this debug output are correct? (Choose two.)

The remote gateway IP address is 10.0.0.1.

It shows a phase 1 negotiation.

The negotiation is using AES128 encryption with CBC hash.

The initiator has provided remote as its IPsec peer ID.

NO.29 View the exhibit, which contains the partial output of adiagnose command, and then answer the question below.

Based on the output, which of the following statements is correct?

Anti-reply is enabled.

DPD is disabled.

Quick mode selectors are disabled.

Remote gateway IP is 10.200.5.1.

NO.30 View the exhibit, which contains a screenshot of some phase-1 settings, and then answer the question below.

The VPN is up, and DPD packets are being exchanged between both IPsec gateways; however, traffic cannot pass through the tunnel. To diagnose, the administrator enters these CLI commands:

However, the IKE real time debug does not show any output. Why?

The debug output shows phases 1 and 2 negotiations only. Once the tunnel is up, it does not show any more output.

The log-filter setting was set incorrectly. The VPN’s traffic does not match this filter.

The debug shows only error messages. If there is no output, then the tunnel is operating normally.

The debug output shows phase 1 negotiation only. After that, the administrator must enable the following real time debug: diagnose debug application ipsec -1.

NO.31 Examine the output of the ‘get router info ospf interface’ command shown in the exhibit; then answer the question below.

Which statements are true regarding the above output? (Choose two.)

The port4 interface is connected to the OSPF backbone area.

The local FortiGate has been elected as the OSPF backup designated router.

There are at least 5 OSPF routers connected to the port4 network.

Two OSPF routers are down in the port4 network.

NO.32 View the exhibit, which contains the partial output of an IKE real time debug, and then answerthe question below.

The administrator does not have access to the remote gateway. Based on the debug output, what configuration changes can the administrator make to the local gateway to resolve the phase 1 negotiation error?

Change phase 1encryption to AESCBC and authentication to SHA128.

Change phase 1 encryption to 3DES and authentication to CBC.

Change phase 1 encryption to AES128 and authentication to SHA512.

Change phase 1 encryption to 3DES and authentication to SHA256.

NO.33 View the exhibit, which contains the output of a debug command, and then answer the question below.

What statement is correct about this FortiGate?

It is currently in system conserve mode because of high CPU usage.

It is currently in FD conserve mode.

It is currently in kernel conserve mode because of high memory usage.

It is currently in system conserve mode because of high memory usage.

NO.34 Refer to exhibit, which contains the output of a BGP debug command.

Which statement explains why the state of the 10.200.3.1 peer is Connect?

The local router is receiving BGP keepalives from the remote peer, but the local peer has not received the OpenConfirm yet.

The TCP session to 10.200.3.1 has not completed the three-way handshake.

The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet.

The local router has received the BGP prefixes from the remote peer.

NO.35 Refer to the exhibit, which contains partial output from an IKE real-time debug.

Based on the debug output, which phase 1 setting is enabled in the configuration of this VPN?

auto-discovery-shortcut

auto-discovery-forwarder

auto-discovery-sender

auto-discovery-receiver

NO.36 View the central management configuration shown in the exhibit, and then answer the question below.

Which serverwill FortiGate choose for antivirus and IPS updates if 10.0.1.243 is experiencing an outage?

10.0.1.240

One of the public FortiGuard distribution servers

10.0.1.244

10.0.1.242

NO.37 Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)

Installing configuration changes to managed devices

Importing interface mappings from managed devices

Adding devices to FortiManager

Previewing pending configuration changes for managed devices

NO.38 Which of the following statements is trueregarding a FortiGate configured as an explicit web proxy?

FortiGate limits the number of simultaneous sessions per explicit web proxy user. This limit CANNOT be modified by the administrator.

FortiGate limits the total number of simultaneous explicit web proxy users.

FortiGate limits the number of simultaneous sessions per explicit web proxy user The limit CAN be modified by the administrator

FortiGate limits the number of workstations that authenticate using the same web proxy usercredentials.
This limit CANNOT be modified by the administrator.

NO.39 Which two statements about FortiManager is true when it is deployed as a local FDS? (Choose two.)

It caches available firmware updates for unmanaged devices.

It can be configured as an update server, or a rating server, but not both.

It supports rating requests from both managed and unmanaged devices.

It provides VM license validation services.

NO.40 View the exhibit, which contains an entry in the session table, and then answer the question below.

Which one of the following statements is true regarding FortiGate’s inspection of this session?

FortiGate applied proxy-based inspection.

FortiGate forwarded this session without any inspection.

FortiGate applied flow-based inspection.

FortiGate applied explicit proxy-based inspection.

NO.41 Examine the output of the ‘diagnose ips anomaly list’ command shown in the exhibit; then answer the question below.

Which IP addresses are included in the output of this command?

Those whose traffic matches a DoS policy.

Those whose traffic matches an IPS sensor.

Those whose traffic exceeded a threshold of a matching DoS policy.

Those whose traffic was detected as an anomaly by an IPS sensor.

NO.42 What configuration changes can reduce the memory utilization in a FortiGate? (Choose two.)

Reduce the session time to live.

Increase the TCP session timers.

Increase the FortiGuard cache time to live.

Reduce the maximum file size to inspect.

NO.43 Examine thefollowing partial outputs from two routing debug commands; then answer the question below:

Why the default route using port2 is not displayed in the output of the second command?

It has a lower priority than the default route using port1.

It hasa higher priority than the default route using port1.

It has a higher distance than the default route using port1.

It is disabled in the FortiGate configuration.

NO.44 Which the following events can trigger the election of a new primary unit in a HA cluster? (Choose two.)

Primary unit stops sending HA heartbeat

The FortiGuard license for the primary unit is updated.

One of the monitored interfaces in the primary unit is disconnected.

A secondary unit is removed from the HA cluster.

NO.45 Refer to the exhibit, which contains the partial output of a diagnose command.

Based on the output, which two statements are correct? (Choose two.)

Anti-replay is enabled

The remote gateway IP is 10.200.4.1.

DPD is disabled.

Quick mode selectors are disabled.

NO.46 Which configuration can be used to reduce the number of BGP sessions in an IBGP network?

Neighbor range

Route reflector

Next-hop-self

Neighbor group

NO.47 View the exhibit, which contains the output of a BGP debug command, and then answer the question below.

Which ofthe following statements about the exhibit are true? (Choose two.)

The local router’s BGP state is Established with the 10.125.0.60 peer.

Since the counters were last reset; the 10.200.3.1 peer has never been down.

The local router has received atotal of three BGP prefixes from all peers.

The local router has not established a TCP session with 100.64.3.1.

NO.48 Refer to the exhibit, which shows the output of a debug command.

Which two statements about the output are true? (Choose two.)

The local FortiGate OSPF router ID is 0.0.0.4.

Port4 is connected to the OSPF backbone area.

In the network connected to port4, two OSPF routers are down.

The local FortiGate is the backup designated router.

To prepare for the Fortinet NSE7_EFW-6.4 exam, candidates can take advantage of a range of study resources offered by Fortinet, including online courses, study guides, and practice exams. In addition, candidates can benefit from hands-on experience with Fortinet’s enterprise firewall solutions, which can help them gain a deeper understanding of the technology and improve their ability to troubleshoot and resolve issues. With the right preparation, candidates can approach the exam with confidence and increase their chances of passing on the first attempt.

Updated NSE7_EFW-6.4 Dumps Questions For Fortinet Exam: https://www.dumpleader.com/NSE7_EFW-6.4_exam.html

Leave a Reply Cancel reply