Provide Valid 300-710 Dumps To Help You Prepare For Securing Networks with Cisco Firepower Exam Dec 10, 2023 [Q143-Q162]

Rate this post

Provide Valid 300-710 Dumps To Help You Prepare For Securing Networks with Cisco Firepower Exam Dec 10, 2023

Cisco 300-710 Dumps Questions [2023] Pass for 300-710 Exam

The Securing Networks with Cisco Firepower certification exam consists of 60-70 multiple-choice and simulation-based questions, and candidates have 90 minutes to complete it. 300-710 exam is available in English and Japanese and can be taken at any Pearson VUE testing center worldwide. Successful candidates will be awarded the Cisco Certified Network Professional Security (CCNP Security) certification, which is recognized globally as a mark of excellence in network security.

QUESTION 143
An engineer is building a new access control policy using Cisco FMC. The policy must inspect a unique IPS policy as well as log rule matching. Which action must be taken to meet these requirements?

Configure an IPS policy and enable per-rule logging.

Disable the default IPS policy and enable global logging.

Configure an IPS policy and enable global logging.

Disable the default IPS policy and enable per-rule logging.

QUESTION 144
What is the difference between inline and inline tap on Cisco Firepower?

Inline tap mode can send a copy of the traffic to another device.

Inline tap mode does full packet capture.

Inline mode cannot do SSL decryption.

Inline mode can drop malicious traffic.

QUESTION 145
What is a valid Cisco AMP file disposition?

non-malicious

malware

known-good

pristine

QUESTION 146
What is a functionality of port objects in Cisco FMC?

to mix transport protocols when setting both source and destination port conditions in a rule

to represent protocols other than TCP, UDP, and ICMP

to represent all protocols in the same way

to add any protocol other than TCP or UDP for source port conditions in access control rules.

QUESTION 147
A connectivity issue is occurring between a client and a server which are communicating through a Cisco Firepower device While troubleshooting, a network administrator sees that traffic is reaching the server, but the client is not getting a response Which step must be taken to resolve this issue without initiating traffic from the client?

Use packet-tracer to ensure that traffic is not being blocked by an access list.

Use packet capture to ensure that traffic is not being blocked by an access list.

Use packet capture to validate that the packet passes through the firewall and is NATed to the corrected IP address.

Use packet-tracer to validate that the packet passes through the firewall and is NATed to the corrected IP address.

QUESTION 148
Which CLI command is used to generate firewall debug messages on a Cisco Firepower?

system support firewall-engine-debug

system support ssl-debug

system support platform

system support dump-table

QUESTION 149
An engineer defines a new rule while configuring an Access Control Policy. After deploying the policy, the rule is not working as expected and the hit counters associated with the rule are showing zero. What is causing this error?

Logging is not enabled for the rule.

The rule was not enabled after being created.

The wrong source interface for Snort was selected in the rule.

An incorrect application signature was used in the rule.

QUESTION 150
A network administrator notices that remote access VPN users are not reachable from inside the network. It is determined that routing is configured correctly, however return traffic is entering the firewall but not leaving it What is the reason for this issue?

A manual NAT exemption rule does not exist at the top of the NAT table.

An external NAT IP address is not configured.

An external NAT IP address is configured to match the wrong interface.

An object NAT exemption rule does not exist at the top of the NAT table.

QUESTION 151
A company is in the process of deploying intrusion prevention with Cisco FTDs managed by a Cisco FMC. An engineer must configure policies to detect potential intrusions but not block the suspicious traffic. Which action accomplishes this task?

Configure IDS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by unchecking the “Drop when inline” option.

Configure IPS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by checking the “Drop when inline” option.

Configure IPS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by unchecking the “Drop when inline” option.

Configure IDS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by checking the “Drop when inline” option.

QUESTION 152
Refer to the exhibit.

An engineer is modifying an access control policy to add a rule to Inspect all DNS traffic that passes it making the change and deploying the policy, they see that DNS traffic Is not being Inspected by the Snort engine.
What is……

The action of the rule is set to trust instead of allow.

The rule must specify the security zone that originates the traffic.

The rule Is configured with the wrong setting for the source port.

The rule must define the source network for inspection as well as the port.

QUESTION 153
What is the result a specifying of QoS rule that has a rate limit that is greater than the maximum throughput of an interface?

The rate-limiting rule is disabled.

Matching traffic is not rate limited.

The system rate-limits all traffic.

The system repeatedly generates warnings.

QUESTION 154
An engineer configures a network discovery policy on Cisco FMC. Upon configuration, it is noticed that excessive and misleading events filing the database and overloading the Cisco FMC. A monitored NAT device is executing multiple updates of its operating system in a short period of time. What configuration change must be made to alleviate this issue?

Leave default networks.

Change the method to TCP/SYN.

Increase the number of entries on the NAT device.

Exclude load balancers and NAT devices.

QUESTION 155
Refer to the exhibit.

What is the effect of the existing Cisco FMC configuration?

The remote management port for communication between the Cisco FMC and the managed device changes to port 8443.

The managed device is deleted from the Cisco FMC.

The SSL-encrypted communication channel between the Cisco FMC and the managed device becomes plain-text communication channel.

The management connection between the Cisco FMC and the Cisco FTD is disabled.

QUESTION 156
When do you need the file-size command option during troubleshooting with packet capture?

when capture packets are less than 16 MB

when capture packets are restricted from the secondary memory

when capture packets exceed 10 GB

when capture packets exceed 32 MB

QUESTION 157
Which two packet captures does the FTD LINA engine support? (Choose two.)

Layer 7 network ID

source IP

application ID

dynamic firewall importing

protocol

QUESTION 158
An engineer must investigate a connectivity issue and decides to use the packet capture feature on Cisco FTD. The goal is to see the real packet going through the Cisco FTD device and see the Snort detection actions as a part of the output. After the capture-traffic command is issued, only the packets are displayed. Which action resolves this issue?

Use the verbose option as a part of the capture-traffic command

Use the capture command and specify the trace option to get the required information.

Specify the trace using the -T option after the capture-traffic command.

Perform the trace within the Cisco FMC GUI instead of the Cisco FTD CLI.

QUESTION 159
An analyst is investigating a potentially compromised endpoint within the network and pulls a host report for the endpoint in question to collect metrics and documentation. What information should be taken from this report for the investigation?

client applications by user, web applications, and user connections

number of attacked machines, sources of the attack, and traffic patterns

intrusion events, host connections, and user sessions

threat detections over time and application protocols transferring malware

QUESTION 160
An organization wants to secure traffic from their branch office to the headquarter building using Cisco Firepower devices, They want to ensure that their Cisco Firepower devices are not wasting resources on inspecting the VPN traffic. What must be done to meet these requirements?

Configure the Cisco Firepower devices to ignore the VPN traffic using prefilter policies

Enable a flexconfig policy to re-classify VPN traffic so that it no longer appears as interesting traffic

Configure the Cisco Firepower devices to bypass the access control policies for VPN traffic.

Tune the intrusion policies in order to allow the VPN traffic through without inspection

QUESTION 161
Refer to the exhibit.

And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?

Cisco Firepower automatically updates the policies.

The administrator requests a Remediation Recommendation Report from Cisco Firepower

Cisco Firepower gives recommendations to update the policies.

The administrator manually updates the policies.

QUESTION 162
A network administrator must create an EtherChannel Interface on a new Cisco Firepower 9300 appliance registered with an FMC tor high availability. Where must the administrator create the EtherChannel interface?

FMC CLI

FTD CLI

FXOS CLI

FMC GUI

Cisco 300-710 certification exam is an industry-recognized credential that validates the knowledge and skills of IT professionals in network security using Cisco Firepower NGFW solutions. Securing Networks with Cisco Firepower certification is intended for network security engineers, network administrators, security analysts, and security consultants who are responsible for designing, deploying, and managing security solutions for their organizations. Earning this certification demonstrates an individual’s expertise in securing networks with Cisco Firepower, and can help to advance their career in the field of network security.

Achieve Success in Actual 300-710 Exam 300-710 Exam Dumps: https://www.dumpleader.com/300-710_exam.html

Leave a Reply Cancel reply