[Jan-2024] Check your preparation for F5 201 On-Demand Exam [Q57-Q76]

Rate this post

[Jan-2024] Check your preparation for F5 201 On-Demand Exam

Practice Exam 201 Realistic Dumps Verified Questions

F5 201 exam is a vendor-specific certification exam that is recognized globally. 201 exam is designed to provide candidates with the knowledge and skills required to manage and configure BIG-IP products. BIG-IP Administrator Exam certification is ideal for network administrators who want to advance their careers and demonstrate their expertise in managing BIG-IP products. BIG-IP Administrator Exam certification is also beneficial for organizations that use BIG-IP products, as it ensures that their network administrators have the necessary skills to manage and configure these products.

NO.57 A BIG-IP Administrator opens a case with F5 Support. The support engineer requests the BIG-IP appliance chassis serial number.
Which TMSH command will provide this information?

. list /sys software

show /sys version

list/sys diags

show /sys hardware

NO.58 A BIG-IP Administrator is configuring a pool with members who have differing capabilities. Connections to pool members must be load balanced appropriately.
Which load balancing method should the BIG-IP Administrator use?

Least Sessions

Least Connections (member)

Fastest (node)

Weighted Least Connections (member)

NO.59 Which statement is true concerning cookie persistence?

Cookie persistence allows persistence independent of IP addresses.

Cookie persistence allows persistence even if the data are encrypted from client to pool member.

Cookie persistence uses a cookie that stores the virtual server, pool name, and member IP address in clear text.

If a client’s browser accepts cookies, cookie persistence will always cause a cookie to be written to the client’s file system.

NO.60 A BIG-IP device sends out the following SNMP trap:
big-ipo.f5.com – bigipExternalLinkChange Link: 1.0 is DOWN
Where in the BIG-IP Configuration utility should the BIG-IP Administrator verify the current status of Link
1.0?

System > Platform

Network > Trunks > Trunk List

Statistics > Performance > System

Network > Interfaces > Interface List

NO.61 A site is load balancing to a pool of web servers. Which statement is true concerning BIG IP’s ability to verify whether the web servers are functioning properly or not?

Web server monitors can test the content of any page on the server.

Web server monitors always verify the contents of the index.html page.

Web server monitors can test whether the server’s address is reachable, but cannot test a page’s content.

Web server monitors can test the content of static web pages, but cannot test pages that would require the web server to dynamically build content.

NO.62 How should a BIG-IP Administrator control the amount of traffic that a newly enabled pool member receives.

set the Slow Ramp Time

set a Connection Limit

set the Priority Group Activation

set a Health Monitor

NO.63 Refer to the exhibit.

A BIG-IP Administrator configures a now VLAN on an HA pair of devices that does NOT yet have any traffic. This action causes the assigned traffic group to fail over to the standby device.
Which VLAN setting should be changed to prevent this issue?

Auto Last Hop

Fail-safe

Customer Tag

Source Check

NO.64 The current status of a given pool is ffline.(red). Which condition could explain that state. Assume the descriptions below include all monitorsThe current status of a given pool is .ffline.(red). Which condition could explain that state. Assume the descriptions below include all monitors assigned for each scenario.

No monitors are currently assigned to any pool, member or node.

The pool has a monitor assigned to it, and none of the pool members passed the test. The pool has a monitor assigned to it, and none of the pool. members passed the test.

The pool has a monitor assigned to it, and only some of the pool’s members passed the test.

A monitor is assigned to all nodes and all nodes have passed the test. The pool’s members have no specific monitor assigned to them.

NO.65 Which two methods can be used to determine which BIG-IP is currently active? (Choose two.)

The bigtop command displays the status.

Only the active system’s configuration screens are active.

The status (Active/Standby) is embedded in the command prompt.

The ifconfig a command displays the floating addresses on the active system.

NO.66 Refer to the exhibit.

A BIG-IP Administrator creates a new Virtual Server. The end user is unable to access the page. During troubleshooting, the administrator learns that the connection between the BIG-IP system and server is NOT set up correctly.
What should the administrator do to solve this issue?

Disable Address Translation

Set Address Translation to Auto Map, configure a SNAT pool, and have pool members in the same subnet of the servers

Set Address Translation to SNAT and configure a specific translation address

Set Address Translation to SNAT and have self-IP configured in the same subnet of servers

NO.67 A BIG-IP device sends out the following SNMP trap:
big-ipo.f5.com – bigipExternalLinkChange Link: 1.0 is DOWN
Where in the BIG-IP Configuration utility should the BIG-IP Administrator verify the current status of Link
1.0?

System > Platform

Network > Trunks > Trunk List

Statistics > Performance > System

Network > Interfaces > Interface List
1.0 is a physical interface, you can see the interface status from the physical interface in the network.

NO.68 When configuring a Virtual Server to use an iRule with an HTTP_REQUEST event, which lists required steps in a proper order to create all necessary objects.

create profiles, create the iRule, create required pools, create the Virtual Server

create the Virtual Server, create required pools, create the iRule, edit the Virtual Server

create a custom HTTP profile, create required pools, create the Virtual Server, create the iRule

create required pools, create a custom HTTP profile, create the iRule, create the Virtual Server

NO.69 A BIG-IP Administrator must configure the BIG-IP device to send system log messages to a remote syslog server In addition, the log messages need to be sent over TCP for guaranteed delivery. What should the BIG-IP Administrator configure?

syslog-ng

Request Logging Profile

HSL Logging

Remote Logging

NO.70 Refer to the exhibit.

Which Pool Members are receiving traffic?

Serv1, serv2,serv3, serv4

serv1, serv3

serv1, serv3, serv4

serv1

NO.71 Which method is recommended for creating a new user from the CLI?

Run f5adduser username’ then ‘f5passwd username’ from bash or tmsh

Run tmsh create auth user username prompt for password’ from bash

edit bigip.conf to add the new user and the user’s clear-text password

Run useradd username’ then ‘passwd username’ from bash tmsh

NO.72 A virtual server is listening at 10.10.1.100:any and has the following iRule associated with it: when CLIENT_ACCEPTED { if {[TCP::local_port] equals 80 } { pool pool1 } elseif {[TCP::local_port] equals 443} { pool pool2 } If a user connects to 10.10.1.100 and port 22, which pool will receive the request?

pool1

pool2

None. The request will be dropped.

Unknown. The pool cannot be determined from the information provided.

NO.73 Which statement is true concerning SSL termination.

A virtual server that has both ClientSSL and ServerSSL profiles can still support cookie persistence.

Decrypting traffic at the BIGElIP allows the use of iRules for traffic management, but increases the load on the pool member.

When any virtual server uses a ClientSSL profile, all SSL traffic sent to theElI BIP G is decrypted before it is forwarded to servers.

If a virtual server has both a ClientSSL and ServerSSL profile, the pool members have less SSL processing than if the virtual server had only a ClientSSL profile

NO.74 Refer of the exhibit.

The 816-IP Administrator runs the command shown and observes a device trust issue between BIG-IP devices in a device group. The issue prevents config sync on device bigip3.local.
What is preventing the config sync?

Next Active Load factor is 0 on bigip1.local

Both devices are standby

Next Active Load factor is 1 on bigip1.local

Time Delta to local system is 12

NO.75 What is required for a virtual server to support clients whose traffic arrives on the internal VLAN and pool members whose traffic arrives on the external VLAN?

That support is never available.

The virtual server must be enabled for both VLANs.

The virtual server must be enabled on the internal VLAN.

The virtual server must be enabled on the external VLAN.

NO.76 Refer to the exhibit.

Which two pool members are eligible to receive new connections? (Choose two)

10.21.0.102.80

10.21.0.104.80

10.21.0.105.80

10.21.0.101.80

10.21.0.103.80

Valid 201 Dumps for Helping Passing F5 Exam: https://www.dumpleader.com/201_exam.html

Leave a Reply Cancel reply