This page was exported from IT certification exam materials [ http://blog.dumpleader.com ] Export date:Fri Jan 31 2:31:58 2025 / +0000 GMT ___________________________________________________ Title: Validate your Skills with Updated 156-585 Exam Questions & Answers and Test Engine [Q59-Q81] --------------------------------------------------- Validate your Skills with Updated 156-585 Exam Questions & Answers and Test Engine Tested & Approved 156-585 Study Materials Download Free Updated 116 Questions The Check Point Certified Troubleshooting Expert (CCTE) certification is aimed at security professionals who are responsible for troubleshooting complex security issues in large-scale networks. Check Point Certified Troubleshooting Expert certification is designed to validate the skills and expertise of security professionals in areas such as network and VPN troubleshooting, firewall configuration, and advanced threat analysis. To pass the CheckPoint 156-585 Exam, candidates must have a thorough understanding of Check Point products and technologies, as well as hands-on experience in troubleshooting complex issues. They must also have the ability to analyze and diagnose network problems, configure and manage Check Point products, and deploy security policies effectively. Additionally, candidates must have good communication skills and the ability to work under pressure to solve critical security issues.   NEW QUESTION 59What is the simplest and most efficient way to check all dropped packets in real time?  fw ctl zdebug * drop in expert mode  Smartlog  cat /dev/fwTlog in expert mode  tail -f SFWDIR/log/fw log |grep drop in expert mode NEW QUESTION 60What are the maximum kernel debug buffer sizes, depending on the version  8MB or 32MB  8GB or 64GB  4MB or 8MB  32MB or 64MB NEW QUESTION 61You are running R80.XX on an open server and you see a high CPU utilization on your 12 CPU cores You now want to enable Hyperthreading to get more cores to gain some performance. What is the correct way to achieve this?  Hyperthreading is not supported on open servers, on on Check Point Appliances  just turn on HAT in the bios of the server and boot it  just turn on HAT in the bios of the server and after it has booted enable it in cpconfig  in dish run set HAT on NEW QUESTION 62What table does command “fwaccel conns” pull information from?  fwxl_conns  SecureXLCon  cphwd_db  sxl_connections NEW QUESTION 63Joey is configuring a site-to-site VPN with his business partner. On Joey’s site he has a Check Point R80.10 Gateway and his partner uses Cisco ASA 5540 as a gateway.Joey’s VPN domain on the Check Point Gateway object is manually configured with a group object that contains two network objects:VPN_Domain3 = 192.168.14.0/24VPN_Domain4 = 192.168.15.0/24Partner’s site ACL as viewed from “show run”access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.14.0 255.255.255.0 access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.15.0 255.255.255.0 When they try to establish VPN tunnel, it fails. What is the most likely cause of the failure given the information provided?  Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/24 and 192.168.15.0/24, but the peer expects the one network 192.168.14.0/23  Tunnel fails on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/23, but the peer expects the two distinct networks 192.168.14.0/24 and 192.168.15.0/24.  Tunnel fails on Joey’s site, because he misconfigured IP address of VPN peer.  Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation due to the algorithm mismatch. NEW QUESTION 64You are upgrading your NOC Firewall (on a Check Point Appliance) from R77 to R80 30 but you did not touch thesecuritypolicy After the upgrade you can’t connect to the new R80 30 SmartConsole of the upgraded Firewall anymore What is a possible reason for this?  new new console port is 19009 and a access rule ts missing  the license became invalig and the firewall does not start anymore  the upgrade process changed the interfaces and IP adresses and you have to switch cables  the IPS System on the new R80.30 Version prohibits direct Smartconsole access to a standalone firewall NEW QUESTION 65Which of the following is NOT a vpn debug command used for troubleshooting?  fw ctl debug -m fw + conn drop vm crypt  vpn debug trunc  pclient getdata sslvpn  vpn debug on TDERROR_ALL_ALL=5 NEW QUESTION 66During firewall kernel debug with fw ctl zdebug you received less information than expected. You noticed that a lot of messages were lost since the time the debug was started. What should you do to resolve this issue?  Increase debug buffer; Use fw ctl debug -buf 32768  Redirect debug output to file; Use fw ctl zdebug -o ./debug.elg  Increase debug buffer; Use fw ctl zdebug -buf 32768  Redirect debug output to file; Use fw ctl debug -o ./debug.elg NEW QUESTION 67To check the current status of hyper-threading, which command would you execute in expert mode?  cat /proc/hypert_status  cat /proc/smt_status  cat /proc/hypert_stat  cat /proc/smt_stat NEW QUESTION 68What is the benefit of running “vpn debug trunc over “vpn debug on”?  “vpn debug trunc” purges ike.elg and vpnd elg and creates limestarnp while starting ike debug and vpn debug  “vpn debug trunc*truncates the capture hence the output contains minimal capture  “vpn debug trunc* provides verbose capture  No advantage one over the other NEW QUESTION 69How can you start debug of the Unified Policy with all possible flags turned on?  fw ctl debug -m UP all  fw ctl debug -m UnifiedPolicy all  fw ctl debug -m fw + UP  fw ctl debug -m UP * NEW QUESTION 70The customer is using Check Point appliances that were configured long ago by third-party administrators. Current policy includes different enabled IPS protections and Bypass Under Load function. Bypass Under Load is configured to disable IPS inspections of CPU and Memory usage is higher than 80%. The Customer reports that IPS protections are not working at all regardless of CPU and Memory usage.What is the possible reason of such behavior?  The kernel parameter ids_assume_stress is set to 0  The kernel parameter ids_assume_stress is set to 1  The kernel parameter ids_tolerance_no_stress is set to 10  The kernel parameter ids_tolerance_stress is set to 10 NEW QUESTION 71URL Filtering is an essential part of Web Security in the Gateway. For the Security Gateway to perform a URL lookup when a client makes a URL request, where is the sync-request forwarded from if a sync-request is required”  RAD Kernel Space  URLF Kernel Client  URLF Online Service  RAD User Space NEW QUESTION 72What are four main database domains?  System, User, Global, Log  System, User, Host, Network  System, Global, Log, Event  Local, Global, User, VPN NEW QUESTION 73What is the main SecureXL database for trackingthe acceleration status of traffic?  cphwd_db  cphwd_tmp1  cphwd_dev_conn_table  cphwd_dev_identity_table NEW QUESTION 74What is the buffer size set by the fw ctl zdebug command?  1 GB  1 MB  8GB  8MB NEW QUESTION 75How many captures does the command “fw monitor -p all” take?  All 15 of the inbound and outbound modules  All 4 points of the fw VM modules  1 from every inbound and outbound module of the chain  The -p option takes the same number of captures, but gathers all of the data packet NEW QUESTION 76Which Daemon should be debugged for HTTPS Inspection related issues?  FWD  HTTPD  WSTLSO  VPND NEW QUESTION 77The two procedures available for debugging in the firewall kernel arei fw ctl zdebugii fw ctl debug/kdebugChoose the correct statement explaining the differences in the two  (i) Is used for general debugging, has a small buffer and is a quick way to set kernel debug flags to get an output via command line whereas (11) is useful when there is a need for detailed debugging and requires additional steps to set the buffer and get an output via command line  (i) is used to debug the access control policy only, however (n) can be used to debug a unified policy  (i) is used to debug only issues related to dropping of traffic, however (n) can be used for any firewall issue including NATing, clustering etc.  (i) is used on a Security Gateway, whereas (11) is used on a Security Management Server NEW QUESTION 78What command is usually used for general firewall kernel debugging andwhatis the sizeofthe buffer that isautomaticallyenabled whenusingthe command?  fw ctl debug, buffer sizeis 1024 KB  fw ell zdebug. buffer size is 32768 KB  fw dl zdebug, buffer size is 1 MB  fw ctl kdeoug. buffer sizeis 32000 KB NEW QUESTION 79John has renewed his NGTX License but he gets an error (contract for Anti-Bot expired). He wants to check the subscription status on the CU of the gateway, what command can he use for this?  cpstat antimalware -I subscription _status  fw monitor license status  fwm lie print  show license status NEW QUESTION 80What is the purpose of the Hardware Diagnostics Tool?  Verifying that Check Point Appliance hardware is functioning correctly  Verifying the Security Management Server hardware is functioning correctly  Verifying that Security Gateway hardware is functioning correctly  Verifying that Check Point Appliance hardware is actually broken NEW QUESTION 81An administrator receives reports about issues with log indexing and text searching regarding an existing Management Server. In trying to find a solution she wants to check if the process responsible for this feature is running correctly. What is true about the related process?  fwm manages this database after initialization of the ICA  cpd needs to be restarted manual to show in the list  fwssd crashes can affect therefore not show in the list  solr is a child process of cpm  Loading … Who cannot take the CheckPoint 156-585 Certification Exam? You cannot take this certification exam if you have a Record of Arrest or Conviction for a Felony, or if you have been terminated from any certified position within your organization within the last three years. Also, you may not have passed the CheckPoint 156-585 exam within the past two years. Request to take the exam again after you have had time to brush up on your skills.   Regular Free Updates 156-585 Dumps Real Exam Questions Test Engine: https://www.dumpleader.com/156-585_exam.html --------------------------------------------------- Images: https://blog.dumpleader.com/wp-content/plugins/watu/loading.gif https://blog.dumpleader.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-02-08 12:29:03 Post date GMT: 2024-02-08 12:29:03 Post modified date: 2024-02-08 12:29:03 Post modified date GMT: 2024-02-08 12:29:03