Prepare for your exam certification with our SCP-NPM Certified SolarWinds [Q17-Q31] : IT certification exam materials : http://blog.dumpleader.com

NO.17 You receive an alert that one of your routers is experiencing critical level CPU utilization. The router details in the web console show as critical utilization, but you do not consider the utilization on that router to be at a critical level.
What change can you make in NPM to reflect a CPU utilization level you consider to be critical for the device?

Copy the alert, change the trigger threshold, and limit the scope on that device

Change the global critical CPU threshold for node statuses

Change the critical CPU threshold on the node

Change the trigger threshold on the alert

NO.18 Which statistic should you use to determine peak network traffic?

Network latency

Bandwidth usage

Packet loss

Protocol distribution

NO.19 You can import device-specific MIBs into the SolarWinds MIB Database, but you cannot import UnDP pollers based on OIDs from device-specific MIBs.

True

False

NO.20 Which is not true for Device Studio Poller?

Collects data from Orion Failover Engine or Hot Standby Engines

Can perform logical operations or transformations on the polled data

Polled values are displayed in existing resources

Can poll multiple OIDs for a given technology

NO.21 What is the average resource consumption of an agent?

Less than 1% CPU, no storage because the agent is 1% in memory for faster access

Between 1-2% CPU if the bandwidth is less than 8 KB/s

Less than 1% CPU, max 1 MB of memory, 1 MB storage

Agents run as a virtual process and do not require local resources

NO.22 Which is the best way to monitor an SNMP metric that NPM is not monitoring out-of-the-box?

Create a custom poller

Node Management utility

Update the SolarWinds MIB database

Enable CLI polling

NO.23 What is required of your nodes to detect duplex mismatches? (Choose all that apply.)

Duplex of both devices must be identified as full or half

Ensure corresponding values for each interface are different

The nodes must support topology and be interconnected

Unify the duplex mode configuration on neighboring interfaces

NO.24 You created a Universal Device Poller (UnDP) but cannot find an OID in the MIB tree. How do you resolve this issue?

Restart the Universal Device Poller

Update the MIB database

Rediscover the node via Network Sonar Discovery

Add the node to NPM for monitoring

NO.25 Your network includes the headquarters and three remote sites. Users from remote site A complain they do not have access to the company’s accounting server. Users from remote site B and C have access to the accounting server. How can you find the source of the issue?

Use NetPath to see if there are problem areas between remote site A and the headquarters

Verify that the accounting servers’ CPU utilization are not abnormally high

Use NetPath to see if there are problem areas between remote site A and remote sites B and C

Verify that the accounting servers are up

NO.26 When a router monitored by NPM reboots, the interface indexes statuses change to unknown in NPM. What do you do after you remove the unknown interfaces?

Update the NPM internal ID numbers

Manually update the interface indexes

Rum a list of resources on that node and add the interfaces with the updated index IDs

Run the Configuration Wizard to update the interface indexes

NO.27 In which scenario is an agent the best solution?

If you cannot allow ICMP polling on your routers

If hosts in distributed networks have overlapping IP addresses

If the WMI ports are already in use on Linux

If Native GLX log file monitoring is required

NO.28 Capacity planning is available for which metrics?

Up/Down, Packet Loss, and Latency

Response Time, Interface, and Volume Utilization

CPU, Memory, and Interface

Hardware Health

NO.29 What is required to monitor tenants in your SDN environment with NPM Cisco ACI monitoring? (Choose all that apply.)

View your SDN environment in Orion Maps

Add an APIC node to NPM

Enable API polling on the APIC node

Enable API polling on all ACI devices

NO.30 You configured devices to send SNMP traps to NPM, but do not see the messages in the Orion Web Console. You verified that the firewall ports are open and the devices are correctly configured.
What can you verify to troubleshoot the cause?

Verify you configured the SNMP Traps view in the Orion Web Console

Verify that you have the SNMP Trap module installed for NPM

Verify the SNMP trap service is running

Verify you use Log Analyzer to view traps

NO.31 All users can create their own Orion Maps. How do you limit a user from seeing or working with select monitored entities through the SolarWinds server?

Unmanage entities to remove access to the Orion user account

Configure permissions on the monitored entity to remove access to the Orion user account

Configure Alert imitations to remove access to the Orion user account

Configure Account limitations to remove access to the Orion user account