This page was exported from IT certification exam materials [ http://blog.dumpleader.com ] Export date:Sat Feb 1 0:48:22 2025 / +0000 GMT ___________________________________________________ Title: 100% Pass Top-selling H12-811-ENU Exams - New 2024 Huawei Pratice Exam [Q421-Q441] --------------------------------------------------- 100% Pass Top-selling H12-811-ENU Exams - New 2024 Huawei Pratice Exam HCIA-Datacom Dumps H12-811-ENU Exam for Full Questions - Exam Study Guide The Huawei H12-811-ENU exam is conducted online and consists of 60 multiple-choice questions that need to be completed within 90 minutes. H12-811-ENU exam is available in both English and Chinese languages. The passing score for H12-811-ENU exam is 600 out of 1000, and the exam fee is USD 200. Huawei H12-811-ENU (HCIA-Datacom V1.0) Certification Exam is a comprehensive assessment of an individual's ability to work with data communications technologies. HCIA-Datacom V1.0 certification is ideal for professionals who want to specialize in data communications and develop their skills in managing, configuring, and troubleshooting data networks. HCIA-Datacom V1.0 certification is recognized globally and can help IT professionals advance their careers, stand out in a competitive job market, and increase their earning potential.   NEW QUESTION 421Three Layer 2 switches are interconnected with one HUB. The switches are all enabled with STP bridge ID. Refer to the figure below. What are the default errors of other configurations? () (Single-choice question)  SWA is the root bridge in the simple network  The two ports on SWA are designated ports and are in the forwarding state  G0/0/2 of SWA is blocked  G0/0/1 of SWC is alternative. It is in blocking state NEW QUESTION 422If the broadcast address of a network is 172.16.1.255, what might its network address be?  172.16.2.0  172.16.1.128  172.16.1.1  172.16.1.253 NEW QUESTION 423To query the configuration information of the device’s OSPF protocol, which of the following commands can be used? (Multiple Choice)  display ospf peer  Enter the command “display this” in the OSPF protocol view  display current-configuration  dis ip routing-table NEW QUESTION 424About the above configuration command is correct ()  Modify the user’s authority level to 3. And save the configuration  Modify the limit level of the save command used by a user to 3  Modify the permission level of the user view command to 3, and save the matching sinus  Modify the permission level of the save command in the user view to 3 NEW QUESTION 425Which of the following statements are correct for the MAC address of the existing switch? ()  MAC. The address 5489-9885-18a8 is manually configured by the administrator  MAC. The address 5489-9811-0b49 is manually configured by the administrator  MAC. Address 5489-989d-1d30 is manually configured by the administrator  After the switch restarts, all MAC addresses need to be re-learned NEW QUESTION 426The following description of the Layer 2 Ethernet switch is incorrect ().  Need to make certain modifications to the layer 3 header of the forwarded message, and then forward it  Able to learn MAC. Address  Forward according to the Layer 2 header information of the Ethernet frame  Layer 2 Ethernet switch works at the data link layer NEW QUESTION 427Regarding the control plane of the device, which of the following statements is correct? (Multiple choice)  The control plane is responsible for the interaction of routing protocols between devices  The control plane provides equipment monitoring capabilities  The control plane is responsible for directing data forwarding  The control plane is responsible for generating the IP routing table NEW QUESTION 428If the network address of a network is 10.1.1.0/30, what is its broadcast address?  10.1.1.2  10.1.1.3  10.1.1.4  10.1.1.1 NEW QUESTION 429An existing switch is connected to a designated port through a port, but the port does not forward any packets, but can monitor network changes by receiving BPDUs, then the role of the port should be ().  DesignateD. port  Alternate port  Disable port  Root port NEW QUESTION 430If the Length/Type of an Ethernet data frame is 0x8100. Which of the following statements is correct?  There is always a UDP header in the upper layer of each data frame  The upper layer of a data frame must exist IP header  There is always a TCP header in the upper layer of each data frame  Each data frame must carry VLAN TAG NEW QUESTION 431A company applies for a C. IP address segment, which needs to be evenly distributed to 8 subsidiaries. The largest subsidiary has 14 computers. Different subsidiaries must be in different network segments, so the subnet mask should be set. for()  255.255.255.192  255.255.255.240  255.255.255.0  255.255.255.128 NEW QUESTION 432The information shown in the figure is the port status information displayed on a switch running STP. According to this information, what is wrong in the following description? () (Single-choice question)  This switch is the root switch in the network  The priority of this switch is 0  This network may only contain this switch  This switch may be connected to 6 other switches NEW QUESTION 433NAPT distinguishes the IP addresses of different users through the protocol numbers in TCP, UDP, or IP packets.  True  False NEW QUESTION 434The route entry 10.0.0.24/29 may be aggregated from which of the following subnet routes? ()*  10.0.0.23/30  10.0.0.28/30  10.0.0.26/30  10.0.0.24/30 NEW QUESTION 435What is the first operation performed by the FIT AP after obtaining the AC’s IP address?  Upgrade software version  Download the configuration file  Establish CAPWAP tunnel  Request configuration file NEW QUESTION 436As shown in the figure, all four switches run STP, and various parameters adopt default values. If the G0/0/2 port of switch C is blocked and the configuration BPDU cannot be sent through this port, how long will it take for the blocked port in the network to enter the forwarding state?  about 3 seconds  about 50 seconds  about 30 seconds  about 15 seconds NEW QUESTION 437Which of the following statements about VLANIF interfaces are correct? ()  The VANIF interface does not need to learn MAC addresses.  The VLANTF interface does not have a MAC address.  Different VLANIF interfaces can use the same IP address  The VLANIF interface is a Layer 3 interface NEW QUESTION 438In the network shown in the figure below, the bridge ID of the switch has been marked. Enter the command stp root secondary on the SWD switch, and which of the following switch will become the root bridge of this network?  SWC  SWA  SWB  SWD NEW QUESTION 439If it is UDP, the value of the protocol field of the network layer is 6 ()  True  False NEW QUESTION 440As shown in the figure, two switches use the default parameters to run STP root primary; Switch B uses the configuration command STP priority 0. Then which port will be blocked? () (Single- choice question)  G0/0/3 of HUB  G0/0/2 of switch A  G0/0/1 of switch A  G0/0/1 of switch B NEW QUESTION 441On Huawei switches, you can use the vlan batch command to create multiple VLANs in batches, simplifying the configuration process. ()  True  False  Loading … Authentic Best resources for H12-811-ENU Online Practice Exam: https://www.dumpleader.com/H12-811-ENU_exam.html --------------------------------------------------- Images: https://blog.dumpleader.com/wp-content/plugins/watu/loading.gif https://blog.dumpleader.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-06-07 16:52:55 Post date GMT: 2024-06-07 16:52:55 Post modified date: 2024-06-07 16:52:55 Post modified date GMT: 2024-06-07 16:52:55