This page was exported from IT certification exam materials [ http://blog.dumpleader.com ] Export date:Fri Mar 14 5:32:38 2025 / +0000 GMT ___________________________________________________ Title: Easily To Pass New 200-301 Verified & Correct Answers [Mar 11, 2025 [Q388-Q409] --------------------------------------------------- Easily To Pass New 200-301 Verified & Correct Answers [Mar 11, 2025 Free 200-301 Exam Files Downloaded Instantly To prepare for the Cisco 200-301 certification exam, candidates can take advantage of various study materials, including official Cisco training courses, study guides, and practice exams. They can also join online communities and forums to interact with other candidates and network professionals. Cisco Certified Network Associate Exam certification exam is a valuable credential for network professionals who want to enhance their career prospects and stay up-to-date with the latest networking technologies. Cisco 200-301 certification exam is a globally recognized certification offered by Cisco Systems. 200-301 exam is designed to validate an individual's knowledge and skills in networking fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability. Cisco Certified Network Associate Exam certification exam is intended for individuals who are looking to start a career in networking, or for those who are already working in the field and want to expand their knowledge and skills. Network Fundamentals Explained! First things first, you will be expected to explain the role and significance of network components. This topic will also require you to compare cabling types and physical interface, compare UDP and TCP, configure IPv6 prefix and addressing, explain wireless principles, describe the fundamentals of virtualization, and describe the concepts of switching among the rest.   Q388. Which two spanning-tree states are bypassed on an interface running PortFast? (Choose two.)  disabled  listening  forwarding  learning  blocking Q389. Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right. Q390. Refer to the exhibit.Which command must be enable a floating default route on router A?  ip route 0.0.0.0 0.0.0.0 192.168.1.2  ip default-gateway 192.168.2.1  ip route 0.0.0.0 0.0.0.0 192.168.1.2 10  ip route 0.0.0.0 0.0.0.0 192.168.2.1 10 Q391. Drag the descriptions of IP protocol transmissions from the left onto the IP traffic types on the right. ExplanationTCP* Sends tranmissions in sequence4. Transmits packets individually6. Uses a lower transmission rate to ensure relabilityUDP5. Uses a higher transmission rate to support latency-sensitive application2. Transmissions include an 8-byte header3. Transmits packets as a streamQ392. How do TCP and UDP differ in the way that they establish a connection between two endpoints?  TCP uses synchronization packets, and UDP uses acknowledgment packets.  UDP uses SYN, SYN ACK and FIN bits in the frame header while TCP uses SYN, SYN ACK and ACK bits  UDP provides reliable message transfer and TCP is a connectionless protocol  TCP uses the three-way handshake and UDP does not guarantee message delivery Q393. Which switch technology establishes a network connection immediately when it is plugged in?  PortFast  BPDU guard  UplinkFast  BackboneFast PortFast is useful to connect hosts and switches to a switch. Access layer switches are more frequently“plugged in” and “plugged out” than distribution or core layer switches. Also, this feature’s target is just to minimize STP convergence time.Q394. What identifies the functionality of virtual machines?  Virtualized servers run most efficiently when they are physically connected to a switch that is separate from the hypervisor  The hypervisor can virtualize physical components including CPU. memory, and storage  Each hypervisor can support a single virtual machine and a single software switch  The hypervisor communicates on Layer 3 without the need for additional resources Q395. Refer to the exhibit.Router R2 is configured with multiple routes to reach network 10 1.1 0/24 from router R1. What protocol is chosen by router R2 to reach the destination network 10.1 1 0/24?  eBGP  static  OSPF  EIGRP Q396. Which technology allows a large number of private IP addresses to be represented by a smaller number of public IP addresses?  NAT  NTP  RFC 1631  RFC 1918 Q397. What are two characteristics of a public cloud Implementation? (Choose two.)  It is owned and maintained by one party, but it is shared among multiple organizations.  It enables an organization to fully customize how It deploys network resources.  It provides services that are accessed over the Internet.  It Is a data center on the public Internet that maintains cloud services for only one company.  It supports network resources from a centralized third-party provider and privately-owned virtual resources Q398. Physical connectivity is implemented between the two Layer 2 switches,and the network connectivity between them must be configured.I . Configure an LACP EtherChanneI and number it as 44; configure itbetween switches SWI and SW2 using interfaces EthernetO/O andEthernet0/1 on both sides. The LACP mode must match on both ends.2. Configure the EtherChanneI as a trunk link.3. Configure the trunk link with 802. Iq tags.4. Configure VLAN ‘MONITORING’ as the untagged VLAN of theEtherChannel.GuidelinesThis is a lab item in which tasks will be performed on virtual devices.* Refer to the Tasks tab to view the tasks for this lab item.* Refer to the Topology tab to access the device console(s) and perform the tasks.* Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.* All necessary preconfigurations have been applied.* Do not change the enable password or hostname for any device.* Save your configurations to NVRAM before moving to the next item.* Click Next at the bottom of the screen to submit this lab and move to the next question.* When Next is clicked, the lab closes and cannot be reopened. Solution is given below explanation.ExplanationTo configure an LACP EtherChannel and number it as 44, configure it between switches SW1 and SW2 using interfaces Ethernet0/0 and Ethernet0/1 on both sides, configure the EtherChannel as a trunk link, configure the trunk link with 802.1q tags, and configure VLAN ‘MONITORING’ as the untagged VLAN of the EtherChannel, you need to follow these steps:On both SW1 and SW2, enter the global configuration mode by using the configure terminal command.On both SW1 and SW2, select the two interfaces that will form the EtherChannel by using the interface range ethernet 0/0 – 1 command. This will enter the interface range configuration mode.On both SW1 and SW2, set the protocol to LACP by using the channel-protocol lacp command.On both SW1 and SW2, assign the interfaces to an EtherChannel group number 44 by using the channel-group 44 mode active command. This will create a logical interface named Port-channel44 and set the LACP mode to active on both ends. The LACP mode must match on both ends for the EtherChannel to form.On both SW1 and SW2, exit the interface range configuration mode by using the exit command.On both SW1 and SW2, enter the Port-channel interface configuration mode by using the interface port-channel 44 command.On both SW1 and SW2, configure the Port-channel interface as a trunk link by using the switchport mode trunk command.On both SW1 and SW2, configure the Port-channel interface to use 802.1q tags for VLAN identification by using the switchport trunk encapsulation dot1q command.On both SW1 and SW2, configure VLAN ‘MONITORING’ as the untagged VLAN of the Port-channel interface by using the switchport trunk native vlan MONITORING command.On both SW1 and SW2, exit the Port-channel interface configuration mode by using the exit command.On both SW1 and SW2, save the configuration to NVRAM by using the copy running-config startup-config command.Q399. Drag and drop the functions of SNMP fault-management from the left onto the definitions on the right. see the answer below image.ExplanationTable Description automatically generatedQ400. Refer to the exhibit.Refer to the exhibit. All routers in the network are configured R2 must be the DR. After the engineer connected the devices, R1 was elected as the DR. Which command sequence must be configure on R2 to Be elected as the DR in the network?  Option A  Option B  Option C  Option D Q401. Refer to the exhibit.Which route does R1 select for traffic that is destined to 192 168.16.2?  192.168.16.0/21  192.168.16.0/24  192.168 26.0/26  192.168.16.0/27 Q402. Which command can you enter to set the default route for all traffic to an interface?  router (config)#ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/1  router (config)#ip route 0.0.0.0 255.255.255.255 GigabitEthernet0/1  router (config-router)#default-information originate  router (config-router)#default-information originate always Q403. Refer to the exhibit.The link between PC1 and the switch is up. but it is performing poorly. Which interface condition is causing the performance problem?  There is a duplex mismatch on the interface  There is an issue with the fiber on the switch interface.  There is a speed mismatch on the interface.  There is an interface type mismatch Q404. Why choose Cisco DNA Center for automated lifecycle management?  To perform upgrades without service interruption  To provide fast and accurate deployment of patches and updates  To allow SSH access to all nodes in the network.  To provide software redundancy in the network. Q405. Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right. ExplanationQ406. Refer to the exhibit.Traffic that is flowing over interface TenGigabitEthernet0/0 experiences slow transfer speeds. What is the reason for the issue?  heavy traffic congestion  a duplex incompatibility  a speed conflict  queuing drops Q407. Refer to the exhibit.An engineer must configure the interface that connects to PC 1 and secure it in a way that only PC1 is allowed to use the port No VLAN tagging can be used except for a voice VLAN. Which command sequence must be entered to configure the switch?         Q408. Refer to the exhibit. What action establishes the OSPF neighbor relationship without forming an adjacency?  modify hello interval  modify process ID  modify priority  modify network type Section: IP ConnectivityQ409. A device detects two stations transmitting frames at the same time. This condition occurs after the first 64 bytes of the frame is received. Which interface counter increments?  runt  collision  late collision  CRC Section: Network Fundamentals Loading … 100% Pass Guaranteed Free 200-301 Exam Dumps: https://www.dumpleader.com/200-301_exam.html --------------------------------------------------- Images: https://blog.dumpleader.com/wp-content/plugins/watu/loading.gif https://blog.dumpleader.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2025-03-11 10:18:41 Post date GMT: 2025-03-11 10:18:41 Post modified date: 2025-03-11 10:18:41 Post modified date GMT: 2025-03-11 10:18:41