Nov 26, 2023 JN0-231 Exam Crack Test Engine Dumps Training With 103 Questions [Q53-Q76]

Rate this post

Nov 26, 2023 JN0-231 Exam Crack Test Engine Dumps Training With 103 Questions

Obtain the JN0-231 PDF Dumps Get 100% Outcomes Exam Questions For You To Pass

The JN0-231 exam is a 90-minute exam consisting of 65 multiple-choice questions. JN0-231 exam is conducted in English and can be taken at any Pearson VUE testing center worldwide. JN0-231 exam measures the candidate’s knowledge of security concepts, networking concepts, security policies, firewall concepts, and VPNs. JN0-231 exam also tests the candidate’s ability to configure and manage Juniper Networks security systems.

NEW QUESTION 53
Which two UTM features should be used for tracking productivity and corporate user behavior? (Choose two.)

the content filtering UTM feature

the antivirus UTM feature

the Web filtering UTM feature

the antispam UTM feature

NEW QUESTION 54
You want to generate reports from the l-Web on an SRX Series device.
Which logging mode would you use in this scenario?

Syslog

Stream

Event

local

NEW QUESTION 55
Which statement is correct about unified security policies on an SRX Series device?

A zone-based policy is always evaluated first.

The most restrictive policy is applied regardless of the policy level.

A global policy is always evaluated first.

The first policy rule is applied regardless of the policy level.

NEW QUESTION 56
Your company has been assigned one public IP address. You want to enable internet traffic to reach multiple servers in your DMZ that are configured with private address.
In this scenario, which type of NAT would be used to accomplish this tasks?

Static NAT

Destination NAT

Source NAT

NAT without PAT

NEW QUESTION 57
What are configuring the antispam UTM feature on an SRX Series device.
Which two actions would be performed by the SRX Series device for e-mail that is identified as spam? (Choose two.)

Tag the e-mail

Queue the e-mail

Block the e-mail

Quarantine e-mail

NEW QUESTION 58
A security zone is configured with the source IP address 192.168.0.12/255.255.0.255 wildcard match.
In this scenario, which two IP packets will match the criteria? (Choose two.)

192.168.1.21

192.168.0.1

192.168.1.12

192.168.22.12

NEW QUESTION 59
Which actions would be applied for the pre-ID default policy unified policies?

Redirect the session

Reject the session

Log the session

Silently drop the session

NEW QUESTION 60
Which statement about global NAT address persistence is correct?

The same IP address from a source NAT pool will be assigned for all sessions from a given host.

The same IP address from a source NAT pool is not guaranteed to be assigned for all sessions from a given host.

The same IP address from a destination NAT pool will be assigned for all sessions for a given host.

The same IP address from a destination NAT pool is not guaranteed to be assigned for all sessions for a given host.

NEW QUESTION 61
Which two statements are correct about the integrated user firewall feature?(Choose two.)

It maps IP addresses to individual users.

It supports IPv4 addresses.

It allows tracking of non-Windows Active Directory users.

It uses the LDAP protocol.

NEW QUESTION 62
In J-Web. the management and loopback address configuration option allows you to configure which area?

the IP address of the primary Gigabit Ethernet port

the IP address of the Network Time Protocol server

the CIDR address

the IP address of the device management port

J-Web is a web-based interface for configuring and managing Juniper devices. The management and loopback address configuration option in J-Web allows you to configure the IP address of the device management port, which is used to remotely access and manage the device.

NEW QUESTION 63
When configuring antispam, where do you apply any local lists that are configured?

custom objects

advanced security policy

antispam feature-profile

antispam UTM policy

NEW QUESTION 64
You want to automatically generate the encryption and authentication keys during IPsec VPN establishment.
What would be used to accomplish this task?

IPsec

Diffie_Hellman

Main mode

Aggregate mode

NEW QUESTION 65
Your ISP gives you an IP address of 203.0.113.0/27 and informs you that your default gateway is 203.0.113.1.
You configure destination NAT to your internal server, but the requests sent to the webserver at 203.0.113.5 are not arriving at the server.
In this scenario, which two configuration features need to be added? (Choose two.)

firewall filter

security policy

proxy-ARP

UTM policy

NEW QUESTION 66
Click the Exhibit button.

Referring to the exhibit, a user is placed in which hierarchy when the exit command is run?

[edit security policies from-zone trust to-zone dmz]
user@vSRX-1#

[edit]
user@vSRX-1#

[edit security policies]
user@vSRX-1#

user@vSRX-1>

NEW QUESTION 67
Click the Exhibit button.

Referring to the exhibit, which two statements are correct about the ping command? (Choose two.)

The DMZ routing-instance is the source.

The 10.10.102.10 IP address is the source.

The 10.10.102.10 IP address is the destination.

The DMZ routing-instance is the destination.

NEW QUESTION 68
Which statement is correct about IKE?

IKE phase 1 is used to establish the data path

IKE phase 1 only support aggressive mode.

IKE phase 1 negotiates a secure channel between gateways.

IKE phase 1 establishes the tunnel between devices

NEW QUESTION 69
Which two match conditions would be used in both static NAT and destination NAT rule sets? (Choose two.)

Destination zone

Destination interface

Source interface

Source zone

NEW QUESTION 70
What are two characteristic of static NAT SRX Series devices? (Choose two.)

Source and destination NAT rules take precedence over static NAT rules.

A reverse mapping rule is automatically created for the source translation.

Static NAT rule take precedence over source and destination NAT rules.

Static rules cannot coexist with destination NAT rules on the same SRX Series device configuration.

NEW QUESTION 71
An application firewall processes the first packet in a session for which the application has not yet been identified.
In this scenario, which action does the application firewall take on the packet?

It allows the first packet.

It denies the first packet and sends an error message to the user.

It denies the first packet.

It holds the first packet until the application is identified.

This is necessary to ensure that the application firewall can properly identify the application and the correct security policies can be applied before allowing any traffic to pass through.
If the first packet was allowed to pass without first being identified, then the application firewall would not know which security policies to apply – and this could potentially lead to security vulnerabilities or breaches. So it’s important that the first packet is held until the application is identified.

NEW QUESTION 72
Which type of NAT is performed by the SRX Series device?

Source NAT with PAT

Source Nat without PAT

Destination NAT without PAT

Destination NAT with PAT

NEW QUESTION 73
What must be enabled on an SRX Series device for the reporting engine to create reports?

packet capture

security logging

system logging

SNMP

NEW QUESTION 74
What is the correct order in which interface names should be identified?

system slot number -> interface media type -> port number -> line card slot number

system slot number -> port number -> interface media type -> line card slot number

interface media type -> system slot number -> line card slot number -> port number

interface media type -> port number -> system slot number -> line card slot number

NEW QUESTION 75
The free licensing model for Sky ATP includes which features? (Choose two.)

C & C feeds

Infected host blocking

Executable file inspection

Compromised endpoint dashboard

NEW QUESTION 76
You need to collect the serial number of an SRX Series device to replace it. Which command will accomplish this task?

show chassis hardware

show system information

show chassis firmware

show chassis environment

The correct command to collect the serial number of an SRX Series device is the show chassis hardware command [1]. This command will return the serial number of the device, along with other information about the device such as the model number, part number, and version.
This command is available in Junos OS. More information about the show chassis hardware command can be found in the Juniper Networks technical documentation here [1]: https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/show-chassis-hardware.html.

Loading …

Juniper JN0-231 (Security, Associate (JNCIA-SEC)) Certification Exam is a globally recognized certification exam designed for individuals who want to demonstrate their knowledge and skills in Juniper Networks security technologies. Security, Associate (JNCIA-SEC) certification exam validates the candidate’s ability to install, configure, manage, and troubleshoot Juniper Networks security devices. JN0-231 exam covers a wide range of topics, including security policies, security zones, NAT, IPSec VPNs, UTM, AppSecure, and more.

JN0-231 Exam Dumps Contains FREE Real Quesions from the Actual Exam: https://www.dumpleader.com/JN0-231_exam.html

Leave a Reply Cancel reply