Download Free EMC DES-1241 Real Exam Questions Download [Q30-Q46]

Rate this post

Download Free EMC DES-1241 Real Exam Questions Download

Latest EMC DES-1241 Real Exam Dumps PDF

Q30. Which component is hot-swappable?

SFP

Fan

BBU

Expansion IO module

Q31. A Storage Administrator notices a Critical alert present in Dell EMC PowerStore Manager relating to data integrity. What action within the alert details slide-out panel is helpful in troubleshooting the problem?

Select the Gather Support Materials from Service and Support

Access the Repair Flow link to schedule a support engagement

Examine Notifications to obtain a list of corrective actions

Re-engage support through previous listed Related Events

Q32. While on-site troubleshooting a Dell EMC PowerStore system, the node B embedded module fault LED is blinking blue and amber alternating at one second intervals. What does this indicate?

Node is in degraded mode

Node is booting

Node is on service mode

System is not initialized

Q33. Refer to the exhibit.

What is indicated when the circled LED on the node embedded module is illuminated solid amber?

System is booting

Module is faulted

Node is faulted

Cluster is uninitialized

Reference:
https://www.dell.com/support/article/en-pk/sln321266/powerstore-understanding-led-colors-and- states-for-troubleshooting?lang=en

Q34. What describes the power requirements for Dell EMC PowerStore?

Lower model numbered systems require less AC line current than higher model numbered systems

T models require less total power than X models

X models require less total power than T models

Lower model numbered systems require less input voltage (VAC) than higher model numbered systems

Maximum input power 240 VAC ± 10%, single phase For 100-120V, a customer-supplied step-up transformer is required AC Line Current (operating maximum at 200 VAC) 8.1 A 8.1 A 9.0 A 9.0 A 9.3 A 10.4 A https://www.dell.com/support/manuals/en-us/powerstore-5000/pwrstr-plang/power-requirements-for-powerstore-x-model-and-powerstore-t-model?guid=guid-21e142df-e22c-4bbc-8978-7c6124753654&lang=en-us

Q35. Refer to the exhibit.

What is indicated when the circled LED on the base enclosure is illuminated amber?

Base enclosure power-on

Cluster discovery state

Cluster service mode

Base enclosure fault

https://www.dell.com/support/manuals/en-us/powerstore/pwrstr-hwg/base-enclosure-front-view?guid=guid-034671bd-ce1c-4c7f-a4d7-2679611fae51&lang=en-us

Q36. Order the steps to prepare for an NDU process.

Q37. Refer to the exhibit.

What is the result of the network configuration shown for a Dell EMC PowerStore T?

Interfaces are configured for remote replication traffic

Interfaces are configured for PowerStore discovery traffic

Ports 1/1/55 and 1/1/56 are added to a new LACP domain

Ports 1/1/55 and 1/1/56 are added to the VLTi domain

Q38. A Storage Administrator needs to connect through SSH to run svc commands. How is the SSH session configured?

Appliance IP address using port 22

NAS server IP address using port 26

NAS server IP address using port 22

Appliance IP address using port 26

Q39. During an emergency event an ESD-Kit is unavailable for FRU replacement. How can the work proceed?

If FRU does not contain ESD-Kit, continue without it

Order “Emergency ESD-Kit” ASAP

Follow precautions described in the “Emergency Procedure”

Use package material to build “provisional ESD-Kit”

Q40. What is achieved when the Rapid Spanning Tree Protocol (RSTP) is enabled on a Dell EMC PowerStore network configuration?

Redundant connectivity between data switches

Communication between data switches and management switch on PowerStore T

Management between appliance and vCenter on PowerStore X

Fault tolerance between appliances in a PowerStore cluster

Q41. Which component is hot-swappable?

SFP

Fan

BBU

Expansion IO module

Reference:
https://topics-cdn.dell.com/pdf/pwrstr-hwg_en-us.pdf (15)

Q42. What is the result of setting a VLAN ID of 0 on a network when running ICW for Dell EMC PowerStore?

Network will pass tagged traffic

Static route is set

Network will pass untagged traffic

Default route is set

Q43. What method is used to power down a Dell EMC PowerStore system in a true emergency situation?

Run svc_node shutdown

Power Down Cluster in PowerStore GUI

Turn off the cabinet switches

Remove base enclosure power cables

Q44. Match the correct non-disruptive upgrade process step (answer column) with the correct sub-step (match column).

Q45. What describes Dell EMC PowerStore X front-end cabling?

Uses internal VMware virtual switching and does not require a management network

Storage and management use the same LACP bonded cable connection

Uses VLTi data switch interconnectivity to support vMotion networks

Management and discovery use the same cables and connections as storage

“For PowerStore T model appliances, the individual ports within the system bond could be running in active/active mode or active/passive mode. This state depends on whether Link Aggregation Control Protocol (LACP) has been configured on the network switches. To ensure best resiliency and network performance, it is recommended to enable LACP on the network. For more information about configuring LACP for a PowerStore T model appliance, see the document PowerStore Guide for PowerStore T Models on the PowerStore Info Hub. For PowerStore X model appliances, there is no system bond and no LACP configuration is needed because the link aggregation and failover is handled by the virtual switches within the VMware hypervisor. “

Q46. Which component is an FRU?

DIMMs

Embedded IO Module

Nodes

Battery Backup Unit

Loading …

PDF (New 2022) Actual EMC DES-1241 Exam Questions: https://www.dumpleader.com/DES-1241_exam.html

Leave a Reply Cancel reply