Get 2026 Free ASQ CQI Exam Practice Materials Collection [Q30-Q49]

QUESTION 30
The variation that is inherent in a process and generally not controllable by the process operator is called which of the following?
Response:

QUESTION 31
A triangle has two sides adjacent to the 90 angle that measure 6 mm and 20 mm. The length of the hypotenuse is Response:

QUESTION 32
Evidence of which of the following is normally required and can be as simple as retention of certificates and reports of calibration, or as complex as reproduction of the analyses demonstrating the uncertainties claimed for the measurements?
Response:

QUESTION 33
Which of the following regions of the Weibull curve can be described by a time-dependent failure rate function?
Response:

QUESTION 34
You are reviewing a supplier’s calibration records and you find an entry for the micrometers you are holding. It lists the date, item description, tracking number, measurements taken, required accuracy, environmental conditions, pass/fail determination and the calibration technician’s name and signature.
What can you conclude about this system?
Response:

QUESTION 35
During what audit type would the client be more likely not to ignore problems found outside the audit scope?
Response:

QUESTION 36
Company A hires a firm to conduct an ISO 9001 registration audit. This is an example of which of the following types of audits:
Response:

QUESTION 37
A sampling plan where the samples come proportionally from different parts is called a:
Response:

QUESTION 38
An inspector wishes to determine the frequency of defects that have been found during the inspection of a specific part in order to set priorities for resolution. The attribute data could best be evaluated using which of the following?
Response:

QUESTION 39
When a control chart is used on a new process, capability can be assessed at which of the following times?
Response:

QUESTION 40
What is the tolerance of the combined outlet, static mixer, and feed sections based on the chain dimensioning tolerance method?
Response:

QUESTION 41
Which of the following is a drawback of using a pneumatic comparator?
Response:

QUESTION 42
A first-article tool sample inspection is performed to ensure that all
Response:

QUESTION 43
A round pin has a blueprint callout of 15.89 mm to 16.0 mm. A feature control frame has a straightness callout 0.04 at maximum material condition. The gage will accept a total variation of:
Response:

QUESTION 44
Energy dispersive X-ray diffraction (EDXRD) is suitable for semi-quantitative identification of crystals. An example of a quality assurance application includes detecting counterfeit pharmaceuticals masquerading as “expired’ product.
During the inspection, the pharmaceuticals remain in their bottles and are identified by the crystal structure, i.e. the presence or absence of peaks in the x-ray diffraction pattern.
Which best describes this inspection technique?
Response:

QUESTION 45
When performing multiple step equations, e.g. (51.5 + 42.1) – 36.32, what is the rule for maintaining significant digits?
Response:

QUESTION 46
The “check” step of a PDCA cycle requires a project team to
Response:

QUESTION 47
Both scales and balances are used to determine the mass of an object. In what manner does a scale make this determination?
Response:

QUESTION 48
What is the scientific notation for 33,885.25?
Response:

QUESTION 49
Which of the following is an Operating Characteristic (OC) curve?
Response: