(2026) PASS ASET-Ethics-Examination exam with ASET ASET-Ethics-Examination Real Exam Questions [Q50-Q73]

Rate this post

(2026) PASS ASET-Ethics-Examination exam with ASET ASET-Ethics-Examination Real Exam Questions

Real exam questions are provided for ASET Certified Technician tests, which can make sure you 100% pass

ASET ASET-Ethics-Examination Exam Syllabus Topics:

Section	Weight	Objectives
Professional Code of Ethics	40%	– Core Principles 1. Public Safety and Welfare 2. Competence and Integrity 3. Professional Responsibility – Professional Conduct 1. Conflict of Interest 2. Advertising and Solicitation 3. Confidentiality
Safety Codes Act	20%	– Legislation and Regulations 1. Enforcement and Penalties 2. Safety Codes Council 3. Accreditation and Certification
ASETA Act and Bylaws	40%	– Governance and Administration 1. Meetings and Voting Procedures 2. Disciplinary Hearings and Procedures 3. Fees and Dues – Organization Structure 1. Purpose and Mission of ASET 2. Board of Directors and Committees 3. Membership Categories and Rights

Section

Weight

Objectives

Professional Code of Ethics

40%

– Core Principles

1. Public Safety and Welfare
2. Competence and Integrity
3. Professional Responsibility

– Professional Conduct

1. Conflict of Interest
2. Advertising and Solicitation
3. Confidentiality

Safety Codes Act

20%

– Legislation and Regulations

1. Enforcement and Penalties
2. Safety Codes Council
3. Accreditation and Certification

ASETA Act and Bylaws

40%

– Governance and Administration

1. Meetings and Voting Procedures
2. Disciplinary Hearings and Procedures
3. Fees and Dues

– Organization Structure

1. Purpose and Mission of ASET
2. Board of Directors and Committees
3. Membership Categories and Rights

NO.50 If a complaint is settled with the assistance of a mediator, the Investigative Committee may proceed with a preliminary investigation under which legislation?

Section 5 of the ASET Code of Ethics

Section 38 of the Workers’ Compensation Act

Section 22 of the Occupational Health and Safety Act

Section 47 of the Engineering and Geoscience Professions Act

NO.51 A regulated member of ASET has just started a new job and is assigned to a project team with experienced professionals and an old friend. As the project progresses, the member notices that the friend’s drinking and partying is starting to affect the project to the extent that the work environment may be becoming unsafe. The member talks to the friend to explain these concerns, but the friend shrugs it off and says not to worry as it is under control. Which of the following actions should the member take?

Believe the friend that everything is fine.

Work harder to make sure that there will be no safety issues.

Talk to all the co-workers to try to find a solution to help the friend.

Report the problem to management as public safety should come first.

NO.52 One regulated member confides to another regulated member that he misrepresented himself on his resume to his present employer. In that resume, he asserted that he had been employed overseas for the last 12 months, when in fact he was unemployed. Which of the following statements best describes what, if anything, the other regulated member should do with this information?

Talk to the member directly and encourage the member to be honest with the employer.

Ignore the information as any action could hurt the reputation of the member.

Encourage the member to be honest with the employer and, if the member does not comply, report the member to the employer.

Encourage the member to be honest with the employer and, if the member does not comply, report the member to ASET.

NO.53 According to Kant’s theory of formalism, when does conflict arise?

When following a universal principle may cause harm.

When individuals claim self-serving “rights”.

When evaluating the benefits of an action, or when trying to distribute the benefits equally.

When there is a clash between extremes of excess and deficiency.

NO.54 According to the Occupational Health and Safety Act, what shall every worker engaged in an occupation do?

Take reasonable care to protect the health and safety of the work and other workers present while working.

Cooperate with the worker’s employer to protect the health and safety of the worker and other workers present.

Take reasonable care to protect the health and safety of any suppliers engaged by the employer.

A and B.

NO.55 Which of the following boards or committees is responsible for appointing members to the ASET Discipline Committee?

The ASET Council

The ASET Appeal Board

The ASET Practice Review Board

The ASET Discipline Committee

NO.56 Why are professional stamps or seals affixed to certain workplace documents?

To indicate that the documentation has been finalized

To copyright the material on behalf of the professional member’s employer

To add a professional member’s contact information to the documentation

To indicate that a professional member accepts responsibility for the material

NO.57 A regulated member of ASET works for an organization that collects large amounts of data about its customers. The member is approached by a client with a request to access this information. Which of the following actions should the member take in this situation?

Decline the client’s request to access the customer information.

Share the information with the client after signing a confidentiality agreement.

Report the client to the Office of the Information and Privacy Commissioner.

Share the information with the client after customer names are removed from the data.

NO.58 How many public members are required on the ASET Council?

10% of Council

NO.59 Which of the following statements describes the role of a professional regulatory organization?

To publish relevant information about the profession

To set the qualifications for admission into the profession

To seek employment opportunities for members of the profession

To coordinate licensing policies and procedures between organizations

NO.60 A regulated member of ASET employed by a computer manufacturer designs some computer equipment and signs off on the drawings. Although the design has been properly prepared, the manufacturing process is faulty, which increases the cost. The manufacturing division suggests modifications to the design to reduce costs, but the member finds that they would reduce the reliability of the product and would likely cost the company more through warranty claims. The regulated member’s supervisor asks the member to sign off on the changes anyway. Which of the following should the member do?

Sign off on the changes.

Report the issue to ASET.

Raise the reliability concerns to the supervisor.

Go to various media outlets to expose the company.

NO.61 Under which jurisdiction does the Environmental Protection Act fall?

International law

Federal law

Provincial law

Municipal law

NO.62 According to Part 5 of the Engineering and Geoscience Professions Act, what does an “investigated person” mean?

A complainant

A member under investigation

A member of the Investigative Committee

A member of the Investigative Panel

NO.63 A regulated member of ASET is asked to participate in interviews for a new technical position at the organization. The member is surprised to see that one of the candidates being interviewed is a close friend.
Which of the following actions should the member take in this situation?

Disclose the friendship to the employer before the interviews.

Keep the information confidential so as not to influence the hiring process.

Speak with the friend and encourage them to drop out of the competition.

Decline to participate in the interviews.

NO.64 An employer changes the employment contract without the employee’s consent. The employee refuses to accept the changes. The employment contract is therefore terminated. Which of the following is this an example of?

Just cause

Vicarious liability

Restrictive covenant

Constructive dismissal

NO.65 Which of the following statements describes breach of contract?

A failure to declare a financial loss

A failure to complete the obligations in a contract

A failure to review the work of another professional

A failure to exercise due care in the performance of professional duties

NO.66 A regulated member is cancelled for non-payment of dues but is planning to reinstate as a C.E.T. member.
Which of the following actions should the cancelled member take?

No action is required by the member.

Discontinue use of the C.E.T. designation until being reinstated.

Notify ASET and continue to use the C.E.T designation until being reinstated.

Keep the C.E.T. designation on business cards and signatures but notify the employer that reinstatement is required.

NO.67 Employment equity means that fair and equal access to employment opportunities is available to which of the following groups?

All members of a society.

All employees in an organization.

Underrepresented members of a society.

Underrepresented employees in an organization.

NO.68 At what point are serious injuries which occur on a job site required to be reported to Alberta Labour by the employer?

Never, incidents are reported to municipalities

After the employee spends a week in the hospital as an inpatient

After the employee spends two days in the hospital as an inpatient

At the time the employee is admitted to the hospital as an inpatient

NO.69 According to the Occupational Health and Safety Act, who is authorized to require the production of, or examine and make copies of, medical reports or records?

A Director of Medical Services

A person authorized in writing by the Director of Medical Services

An officer designated under the Act

A and B above

NO.70 Who has the authority to enact legislation?

Municipal government

Provincial government

Federal government

B and C above

NO.71 A regulated member may apply for an exemption from the Continuing Professional Development program.
For what length of time is the exemption effective?

6 months

1 year

2 years

3 years

NO.72 What federal law governs privacy?

Privacy Act

Digital Millennium Copyright Act

Personal Information and Protection Act

Personal Information Protection and Electronic Documents Act

NO.73 In relation to the discipline process for ASET members, what does “professional member” mean?

A retired member of ASET

A student member of ASET

A member-in-training of ASET

A regulated member of ASET

Latest ASET-Ethics-Examination Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.dumpleader.com/ASET-Ethics-Examination_exam.html

ASET ASET-Ethics-Examination Exam Syllabus Topics:

Leave a Reply Cancel reply