[Q11-Q33] Nov-2026 Realistic H12-893_V1.0 Accurate & Verified Answers As Experienced in the Actual Test!

Rate this post

Nov-2026 Realistic H12-893_V1.0 Accurate & Verified Answers As Experienced in the Actual Test!

Latest Huawei H12-893_V1.0 Practice Test Questions, HCIP-Data Center Network V1.0 Exam Dumps

Huawei H12-893_V1.0 Exam Overview:

Certification Vendor:	Huawei
Exam Name:	Huawei Certified ICT Professional – Data Center Network V1.0
Exam Number:	H12-893_V1.0
Real Exam Qty:	60
Related Certifications:	HCIE-Data Center Network HCIA-Data Center Network
Exam Format:	Multiple-choice, Single-choice, True/false, Drag-and-drop
Exam Duration:	90 minutes
Passing Score:	600/1000
Available Languages:	English, Chinese
Exam Price:	300 USD
Certificate Validity Period:	3 years
Recommended Training:	HCIP-Data Center Network V1.0 Official Training
Exam Registration:	Pearson VUE Registration
Sample Questions:	Huawei H12-893_V1.0 Sample Questions
Exam Way:	Online or Onsite at Pearson VUE test centers
Pre Condition:	Recommended: HCIA-Data Center Network certification or equivalent knowledge
Official Syllabus URL:	https://e.huawei.com/en/talent/certification/exam/h12-893_v1.0

Q11. Which of the following technologies are Layer 4 load balancing technologies? (Select All that Apply)

Nginx

PPP

LVS

HAProxy

Q12. Which of the following statements is false about centralized gateway deployment using BGP EVPN?

When configuring a VTEP, you need to create a Layer 2 BD and bind a VNI to the Layer 2 BD.

A VXLAN tunnel is identified by a pair of VTEP IP addresses and can be established if the local and remote VTEP IP addresses are reachable to each other at Layer 3.

When BGP EVPN is used to dynamically establish a VXLAN tunnel, the local and remote VTEPs first establish a BGP EVPN peer relationship and then exchange BGP EVPN routes to transmit VNI and VTEP IP address information. A VXLAN tunnel is then dynamically established between them.

When configuring a VTEP, you need to create an EVPN Instance in the Layer 2 BD and configure an RD for the local EVPN instance. You do not need to configure an RT.

Centralized gateway deployment using BGP EVPN in Huawei’s data center networks (e.g., CloudFabric) involves a gateway handling Layer 3 routing for VXLAN overlays. Let’s evaluate each statement:
A). When configuring a VTEP, you need to create a Layer 2 BD and bind a VNI to the Layer 2 BD:
A Bridge Domain (BD) is a Layer 2 broadcast domain in VXLAN, and a Virtual Network Identifier (VNI) is bound to it to segment traffic. This is a standard step when configuring a VXLAN Tunnel Endpoint (VTEP) to map the overlay network. TRUE.
B). A VXLAN tunnel is identified by a pair of VTEP IP addresses and can be established if the local and remote VTEP IP addresses are reachable to each other at Layer 3: VXLAN tunnels are established between VTEPs using their IP addresses as endpoints. Layer 3 reachability (e.g., via underlay routing) is required for tunnel establishment. TRUE.
C). When BGP EVPN is used to dynamically establish a VXLAN tunnel, the local and remote VTEPs first establish a BGP EVPN peer relationship and then exchange BGP EVPN routes to transmit VNI and VTEP IP address information. A VXLAN tunnel is then dynamically established between them: In BGP EVPN, VTEPs establish a BGP peer relationship, exchange routes (e.g., Type 2 for MAC/IP or Type 3 for multicast), and share VNI and VTEP IP details, enabling dynamic tunnel setup. TRUE.
D). When configuring a VTEP, you need to create an EVPN Instance in the Layer 2 BD and configure an RD for the local EVPN instance. You do not need to configure an RT: An EVPN Instance (EVI) is created within a BD, and a Route Distinguisher (RD) is configured to make routes unique. However, Route Targets (RTs) are also required to control route import/export between EVPN peers, ensuring proper VNI and route distribution. Stating that RT configuration is not needed is incorrect, as RTs are essential for BGP EVPN operation. FALSE.
Thus, D is the false statement because RT configuration is necessary in centralized gateway deployment with BGP EVPN.

Q13. Which of the following operations need to be performed before deployment in Easy mode? (Select All that Apply)

Disable data synchronization upon going online for the first time.

Load the license.

Pre-configure the access ports.

Configure an SSH fingerprint verification policy.

Q14. Which of the following is not included in the physical architecture of a server?

Application

VMmonitor

Hardware

Q15. In the spine-leaf DCN architecture, the border leaf node and service leaf node can be deployed on the same device.

TRUE

FALSE

Q16. After an M-LAG works properly, the two member devices synchronize information with each other in real time. Which of the following pieces of information are synchronized between devices? (Select All that Apply)

ACL information

STP status

Device name

LACP information

Q17. “1-3-5” troubleshooting of the CloudFabric intelligent O&M solution can detect, locate, and rectify faults from multiple dimensions. Which of the following are not dimensions supported by this function? (Select All that Apply)

Device

Protocol

Service

Application

Configuration

Q18. iMaster NCE-Fabric is Huawei’s DC controller. Tenants can use it to create VPCs and deploy logical networks as required. After logical NEs are deployed, the corresponding network configurations are delivered to underlying network devices. Which of the following statements is false about the delivered network configurations?

Logical switches are mainly used for Layer 3 communication between hosts on a VXLAN network.
These switches correspond to Layer 3 gateway configurations such as VBDIF interface and VPN instance configurations on physical devices.

An end port represents an online host. It corresponds to the traffic encapsulation type (whether a VLAN tag is carried) configured on a Layer 2 sub-interface of a physical device.

A logical port is equivalent to an independent physical port that is used by a host to connect to a VXLAN network. It corresponds to the Layer 2 sub-interface configuration on a physical device.

Logical switches are mainly used for Layer 2 communication between hosts on a VXLAN network.
These switches correspond to BD and Layer 2 VNI configurations on physical devices.

Q19. Which of the following technologies are open-source virtualization technologies? (Select All that Apply)

Hyper-V

Xen

FusionSphere

KVM

Q20. In the CloudFabric Solution, SecoManager and iMaster NCE-Fabric are deployed independently.
After SecoManager is installed, it needs to be manually interconnected with iMaster NCE-Fabric.

TRUE

FALSE

Q21. Which of the following statements is false about M-LAG deployment?

Multi-level M-LAG must be configured based on V-STP.

Multi-level M-LAG is mainly used to construct a large Layer 2 network in a DCN or directly connect DCNs at Layer 2.

M-LAG networking can be classified into single-level M-LAG networking and multi-level M-LAG networking.

In multi-level M-LAG networking, you can manually configure the root bridge to prevent STP loops.

Q22. Which of the following issues can be identified by the health function of iMaster NCE-FabricInsight? (Select All that Apply)

Switch ARP entry threshold exceeded

OSPF router ID conflict

Switch CPU usage threshold exceeded

Routing loop on the network

Q23. The underlay routing protocol has already converged, but one VTEP cannot establish EVPN sessions with another. Which prerequisite should be verified first?

BGP neighbor establishment

STP forwarding state

VLAN pruning

PortFast configuration

Q24. Linux consists of the user space and kernel space. Which of the following functions are included in the kernel space? (Select All that Apply)

The NIC driver sends data frames.

Data encapsulation

Bit stream transmission

Data encryption

Q25. To allow access to a VXLAN network, you need to configure service access points on devices.
There are two access modes: Layer ? sub-interface and binding. (Enter the acronym in uppercase letters.)

Q26. In the spine-leaf DCN architecture, the border leaf node and service leaf node can be deployed on the same device.

TRUE

FALSE

Q27. Fill in blank
The FusionCompute logical architecture consists of two modules: ___ and CNA. (Enter the acronym in uppercase letters.)

Q28. In the CloudFabric Solution, SecoManager and iMaster NCE-Fabric are deployed independently. After SecoManager is installed, it needs to be manually interconnected with iMaster NCE-Fabric.

TRUE

FALSE

Q29. Which of the following statements are true about the Easy mode? (Select All that Apply)

This mode has low networking requirements.

iMaster NCE-Fabric automatically generates configuration script files.

On iMaster NCE-Fabric, you need to manually create and configure fabric resource pools, managed devices, device groups, device roles, tenants, and VPCs one by one in the Configuration Wizard menu.

Layer 2 and Layer 3 basic services in a VPC are orchestrated on the Easy page.

Q30. Which of the following operations need to be performed before deployment in Easy mode?
(Select All that Apply)

Disable data synchronization upon going online for the first time.

Load the license.

Pre-configure the access ports.

Configure an SSH fingerprint verification policy.

Q31. Which of the following statements is false about the overlay technology and VXLAN protocol?

A VXLAN tunnel endpoint that performs encapsulation is called a VNI.

VXLAN uses ECMP of the underlay network to improve network forwarding performance.

A VXLAN network is built based on UDP.

VXLAN expands the number of subnets to 16 million and supports multi-tenancy.

Q32. Which of the following statements is false about the routing design for the underlay network during DCN deployment?

OSPF is recommended for small and midsize DCNs, and EBGP is recommended for large and midsize networks.

When OSPF is used on the underlay network, only single-area OSPF can be deployed.

Compared with OSPF, EBGP involves fewer calculations and offers better scalability.

When EBGP is used on the underlay network, each group of active-active leaf nodes is deployed in an AS.

Q33. Which of the following statements are true about the tenant service model? (Select All that Apply)

A tenant can apply for independent compute, storage, and network resources.

One logical router is mapped to one VRF.

An EPG can have only one subnet.

A subnet supports the access of only one VM.

Huawei H12-893_V1.0 Exam Syllabus Topics:

Topic	Details
Topic 1	Technical Principles and Applications of Virtualization: This section assesses the skills of IT Solution Architects and Data Center Network Engineers in understanding server and network virtualization concepts, benefits, and implementation strategies within data centers. It also introduces Huawei’s FusionCompute platform, its features, functionalities, and applications in virtualization scenarios.
Topic 2	Data Center Network Technology and Application: This section evaluates the skills of IT Solution Architects and Data Center Network Engineers in understanding the fundamental concepts, evolution, and significance of data centers in modern enterprises. It delves into the overall architecture, including computing, storage, and networking components, and highlights typical application scenarios in sectors like finance, government, and large enterprises. Additionally, it introduces core concepts of data center networking (DCN), focusing on the Spine-Leaf architecture, and provides an overview of essential data center technologies such as VXLAN-based network layers, Underlay and Overlay networks, integrated cabling designs (ToR, EoR, MoR), equipment room modules, and the role of iMaster NCE in managing network devices.
Topic 3	Data Center Network O&M: Aimed at Data Center Network Engineers, this section evaluates their understanding of operation and maintenance (O&M) challenges in data center networks. It introduces Huawei’s intelligent O&M solutions, including iMaster NCE-Fabric and iMaster NCE-FabricInsight, and discusses typical O&M scenarios, management, monitoring, troubleshooting practices, and automated O&M strategies through network service programmability.
Topic 4	Technical Principles and Applications of VXLAN: Aimed at Data Center Network Engineers, this section evaluates their understanding of the necessity, development, and foundational concepts of VXLAN technology in addressing traditional network limitations. It also delves into the principles of Ethernet VPN (EVPN) as a control plane for VXLAN and presents practical VXLAN deployment examples in common data center scenarios.
Topic 5	Data Center Network Planning and Deployment: This section assesses Data Center Network Engineers’ skills in planning, designing, and deploying data center networks using the CloudFabric solution. It covers network architecture design, data planning, underlay and overlay network design, security considerations, management strategies, and provides a deployment guide for the CloudFabric solution in computing scenarios, including pre-configuration, service provisioning, and simplified deployment processes.