Instant Download Network Appliance NS0-184 Free Updated Test Dumps [Q11-Q29]

by dumpleader
NS0-184, Network Appliance, , , ,
Rate this post

Instant Download Network Appliance: NS0-184 Free Updated Test Dumps

Valid NS0-184 FREE EXAM DUMPS QUESTIONS & ANSWERS

Introduction to the Network Appliance NS0-184 Certification Exam

Network Appliance NS0-184 Exam is a certification exam which is also known as NetApp Certified Storage Installation Engineer, ONTAP (NCSIE ONTAP). NS0-184 exam is authorized by the Network Appliance Certification Program. This certification is designed for IT professionals who are proficient in using NetApp products. The Network Appliance NS0-184 examines the understanding of installing, configuring, and maintaining NetApp ONTAP operating systems and software. NS0-184 Dumps will help you pass the Network Appliance NS0-184 exam in the first attempt. This certification also examines the knowledge of the log collection features of the ONTAP software, NetApp best practices, and quality standards. Bypassing the Network Appliance NS0-184 exam, you can demonstrate your expertise in configuring and maintaining NetApp storage external shelves solutions. The guarantee to the worth of time and money spent on the Network Appliance NS0-184 exam practice.

 

QUESTION 11
Click the Exhibit button.

You are installing a new AFF All SAN Array A700 HA pair.
Referring to the exhibit, which IP address would have been used to join node 02 to the cluster during setup?

 
 
 
 

QUESTION 12
You are setting up a peer relationship between two ONTAP clusters.
In this scenario, which two statements are true regarding authentication?

 
 
 
 

QUESTION 13
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?

 
 
 
 

QUESTION 14
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)

 
 
 
 

QUESTION 15
You are installing an AFF A700 system with two disk shelves using ADPv2. After setting up the cluster, you realize that one drive shelf was powered off and that the drives have not been assigned to any of the nodes.
In this scenario, which two resources will help you find a solution? (Choose two.)

 
 
 
 

QUESTION 16
What are two ways to identify an AFF All SAN Array system? (Choose two.)

 
 
 
 

QUESTION 17
In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?

 
 
 
 

QUESTION 18
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?

 
 
 
 

QUESTION 19
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?

 
 
 
 

QUESTION 20
You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster that uses NetApp CN1610 cluster interconnect switches.
In this scenario, what are two valid actions for this installation? (Choose two.)

 
 
 
 

QUESTION 21
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?

 
 
 
 

QUESTION 22
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.
Which NetApp tool will verify which cluster interconnect switches support this configuration?

 
 
 
 

QUESTION 23
What should you do to change the data protocol of a LIF?

 
 
 
 

QUESTION 24
Click the Exhibit button.

Referring to the exhibit, you installed a new AFF A250 HA system with FC at a customer site. The customer asks how many ports can be used for the Ethernet host connections.
In this scenario, what would you tell the customer?

 
 
 
 

QUESTION 25
Your customer wants to know more about the network configuration within the cluster.
In this scenario, which statement is correct about a LIF?

 
 
 
 

QUESTION 26
Click the Exhibit button.

You want to add a FAS2750 HA pair to an existing 6-node cluster.
Referring to the exhibit, which action would you perform to begin adding the node?

 
 
 
 

QUESTION 27
Click the Exhibit button.

A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V switches. They want to perform a non-disruptive upgrade.
Referring to the exhibit, which cable will be required to non-disruptively migrate to the new switches?

 
 
 
 

QUESTION 28
An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?

 
 
 
 

QUESTION 29
Click the Exhibit button.

Your ONTAP cluster shows the cluster network errors that are shown in the event log.
What is used by ONTAP software to log the errors that are shown in the exhibit?

 
 
 
 

The easiest way to get ready for the Network Appliance NS0-184 Certification Exam

To get ready for the Network Appliance NS0-184 Certification Exam, you need to take certain steps. To make your practice easy, you can follow the steps given here. First, make a list of all the topics that you need to know for the Network Appliance NS0-184 Certification Exam. If you have not done so, then make a list of all the topics that you need to learn for the Network Appliance NS0-184 Exam, with the help of the NS0-184 Dumps. Then, prepare for the Network Appliance NS0-184 Certification Exam by practicing all the topics that you have listed. If you are preparing for the NS0-184 Exam, then you need to make a habit of practicing all the topics listed on a regular basis. The most important thing is to select the most reliable source that can help you to get ready for the exam in a short span of time. It is also recommended, to select the perfect time to practice for the Network Appliance NS0-184 Certification Exam.

Brief about the registration process for the Network Appliance NS0-184 Certification Exam

To get registered for the NS0-184 Certification Exam, you need to follow easy and simple procedure. Steps to take are as follows:

  • Once you have completed the registration process, you will receive an email with the details of the Network Appliance NS0-184 exam.

  • You will receive a confirmation email with your login information and the details of the payments you made. Go to the login page and enter the login information to complete the registration process.

  • For the registration for the Network Appliance NS0-184 exam, you will need to follow the instructions given on the website. Clicking on the “Register now for your exam” will redirect you to the registration page of the Pearson Vue.

 

Free NS0-184 Exam Braindumps Network Appliance  Pratice Exam: https://www.dumpleader.com/NS0-184_exam.html

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below