Updated Free Huawei H35-481_V2.0 Test Engine Questions with 60 Q&As [Q17-Q39]

4.8/5 - (5 votes)

Updated Free Huawei H35-481_V2.0 Test Engine Questions with 60 Q&As

The Best HCIP-5G H35-481_V2.0 Professional Exam Questions

Huawei H35-481_V2.0 exam is an excellent opportunity for professionals to demonstrate their expertise in 5G RAN technology and advance their careers in this field. HCIP-5G-RAN V2.0 certification will help candidates stand out in a competitive job market and open up new career opportunities in the telecom industry.

NO.17 In the contention-based random access procedure, which of the following is related to the time-frequency position of the PRACH used by the UE?

PCI

BWP

SSB beam ID

C-RNTI

NO.18 In SA networking, which of the following are required after the Pa reconfiguration of a 5G base station?

Checking whether cell-related alarms are reported.

Checking whether the PCI on the LTE side has taken effect on the NE.

Checking whether the 5G cell services are normal.

Checking whether the PCI on the NR side has taken effect on the NE.

NO.19 Which of the following boards is added, the base station Is reset and you need to log in to the LMT again?

OUMPT

UBBP

UPEU

UEIU

NO.20 Which of the following are the functions of SRSs In NR?

Downlink beamforming weight calculation

Uplink grant

To obtain the uplink channel quality

Uplink beam management

NO.21 Which of the following statements about a self-contained slot is Incorrect?

Faster downlink hybrid automatic repeat request (HARQ) feedback and UL data scheduling to reduce the RTT.

Increased GP overhead due to frequent uplink-downlink switching.

High requirements on latency of terminal hardware processing.

Prolonged sounding reference signal (SRS) transmission period to track fast channel changes and Improve MIMO performance.

NO.22 In SA networking, incorrect TAC configurations will cause UE access to fail.

True

False

NO.23 Which of the following logs is used to analyze the relationship between gNodeB device faults and operations?

Security log

Run log

Operation log

Debug log

NO.24 The PING, TRACERT, CFMTRACE, CFMPING, and UDPECHO commands cannot be executed simultaneously on the same board in a gNodeB.

True

False

NO.25 Which of the following synchronization rasters can be used by a UE during a cell search?

17.28MHz

1200kHz

1.44MHz

100kHz

NO.26 Which of the following actions will trigger SgNB release by the MeNB?

The UE inactivity timer on the NR side expires.

An inter-SgNB cell change occurs.

The MeNB detects that the X2 link is abnormal.

The air interface link on the NR side is abnormal, and a UE reports SCG Failure Info to the eNodeB.

NO.27 As defined in 3GPP, the cell-specific reference signal (CRS) that is always sent in LTE cells is not used in NR, reducing Interference under light loads and control channel overhead.

True

False

NO.28 Which of the following is required when the binding relationship between an NR cell and sector equipment is inconsistent with the planned one?

Adding or deleting an RF module

Adding an NR TDD cell

Adjusting the association relationship between the NR cell and RF module

Replacing the CPRI port connected to an RF module

NO.29 Which of the following may cause exceptions In the GPS clock source?

High signal attenuation is caused due to improper GPS remote distance.

The antenna feeder between the base station and the GPS is faulty, for example, the cable is disconnected.

The GPS is not installed in the correct position, and the number of locked satellites is less than 4.

The GPS satellite card Is faulty.

NO.30 What does it mean when the RUN indicator of an AAU is blinking green (on for is and off for Is)?

There is power supply, but the board is faulty.

The board is working properly.

Software is being loaded to the board, or the board is not started.

There is no power supply, or the board is faulty.

NO.31 Which of the following statements about a self-contained slot is Incorrect?

Faster downlink hybrid automatic repeat request (HARQ) feedback and UL data scheduling to reduce the RTT.

Increased GP overhead due to frequent uplink-downlink switching.

High requirements on latency of terminal hardware processing.

Prolonged sounding reference signal (SRS) transmission period to track fast channel changes and Improve MIMO performance.

NO.32 Which of the following X2 Interconnection solutions are supported by LTE and NR base stations?

Interconnection through RF modules

Interconnection through the a

Interconnected through the backplane in co-BBU separate-MPT scenarios

Interconnection through traditional IP RAN

NO.33 The STR CROSFEEDTST command can be used to check for crossed feeder connections of an AAU.

True

False

NO.34 In the contention-based random access procedure, which of the following is related to the time-frequency position of the PRACH used by the UE?

PCI

BWP

SSB beam ID

C-RNTI

NO.35 If multiple IP addresses with different next hop addresses are planned for the gNodeB, which of the following route configuration modes is not applicable?

Destination address route configuration

Source address route configuration

Direct route configuration

NO.36 Which of the following statements about NR subcarriers are incorrect?

The larger the subcarrier spacing, the larger the number of symbols.

The smaller the subcarrier spacing, the larger the CP length and the more suitable it becomes for wide coverage.

The smaller the subcarrier spacing, the lower the power spectral density.

The larger the subcarrier spacing, the larger the slot length.

NO.37 In NSA networking, which of the following objects are unnecessary to configrued for a gNodeB in SI self-setup scenarios?

USERPLANEHOST

USERPLANEPEER

SCTPPEER

SCTPHOST

NO.38 One of the challenges of 5G network construction is to provide Indoor coverage in large stadiums, where Indoor interference severely affects network coverage and capacity. Which of the following solutions can effectively mitigate the interference caused by Indoor coverage with high-density site deployment?

High-power RRUs

Massive MIMO AAU

Multi-sector cell

Sector splitting

NO.39 Which of the following may cause exceptions In the GPS clock source?

High signal attenuation is caused due to improper GPS remote distance.

The antenna feeder between the base station and the GPS is faulty, for example, the cable is disconnected.

The GPS is not installed in the correct position, and the number of locked satellites is less than 4.

The GPS satellite card Is faulty.

To prepare for the Huawei HCIP-5G-RAN V2.0 certification exam, candidates can take advantage of various training resources, such as online courses, training materials, and practice exams. Huawei also provides a range of certification paths for professionals looking to advance their careers in 5G, including the HCIA-5G, HCIP-5G-Core, and HCIP-5G-RAN certifications.

Try 100% Updated H35-481_V2.0 Exam Questions [2023]: https://www.dumpleader.com/H35-481_V2.0_exam.html

Leave a Reply Cancel reply