NO.46 A technician recently replaced a power supply In a user’s PC. Since then, the PC powers off immediately and provides no feedback when the user launches certain applications. This occurs consistently after reboots. Which of the following is the MOST likely cause of the issue?

NO.47 Which of the following ports are used for secure sessions? (Select two.)

NO.48 A user reports a corporate computer, which was recently moved, can no longer print to the default printer. A technician verifies all the cables are connected, power cycles the printer, and restarts the PC but still cannot print to the default printer. The technician notices an identical printer in Devices and Printers that ends with (copyl). The (copyl) printer prints without issue. Which of the following MOST likely caused the issue when the computer was moved?

NO.49 Which of the following colors is used to designate a USB 3.0 connector?

NO.50 A customer recently moved a high-end graphics card from a known-working computer to a different computer.
The computer works without issue when viewing email and web pages or when using certain applications.
However, when a game with high-end graphics requirements is opened, the program will run for a few minutes before the computer shuts down. Which of the following is MOST likely causing the problem?

NO.51 A technician has noticed that when at company headquarters the laptop connection to the Internet is more responsive than when using the company-provided phone as a hot-spot. The technician updated the drivers on the WiFi NIC without resolution and then verified the configuration on the WiFi was correct.
Which of the following configurations could cause the decreased performance?

NO.52 Which of the following servers provides access to user data over a LAN?

NO.53 A user brings in a smartphone for repair. The device is unable to send/receive calls or connect to WiFi. All applications on the device are working unless they require connectivity.
Which of the following is MOST likely causing the problem?

NO.54 A customer wants to upgrade a PC’s internal storage to have more room to store backups, photos, and videos.
The new storage should be large enough to avoid expanding again next year. Which of the following BEST meets these needs?

NO.55 A small office wants to install a server that can provide name resolution for internal clients.
Which of the following server types would BEST accomplish this?

NO.56 Which of the following is the minimum category cable that supports 1000Mbps speed?

NO.57 A virtual environment in which an application uses memory and a processor from a provider based on a leased rate that depends on the amount of resources used per month is referred to as:

NO.58 A technician needs to routinely run scripting commands in Linux but does not want to walk over to the server room every time to perform the task. The technician also travels between buildings and has a Windows 10 laptop with 4GB of memory and a fully partitioned 500GB hard drive.
Which of the following steps should the technician take to resolve this issue? (Choose two.)

NO.59 고객인 Ann은 두 대의 맞춤형 PC를 요청했는데, 하나는 게임용으로, 다른 하나는 비즈니스용 가상화 워크스테이션으로 사용하려고 합니다.
게임용 PC는 최신 게임과 게임 주변기기를 지원해야 합니다.
가상화 워크스테이션은 Ann의 홈 비즈니스의 일부로 여러 프로덕션 가상 머신을 호스팅할 수 있어야 합니다.
지침
상단의 탭을 사용하여 PC를 전환할 수 있습니다.
개체는 적절한 슬롯/디스플레이 영역에 배치해야 하며 한 번만 사용할 수 있습니다.
모든 슬롯/디스플레이 영역이 채워져야 합니다.
언제든지 시뮬레이션의 초기 상태로 되돌리려면 모두 초기화 버튼을 클릭하세요.

NO.60 A technician is configuring a new IAN for a client. The technician deploys a DHCP sewer with the following settings

Alter the technician adds clients to the LAN, none of them can contact the Internet which of the following is the MOST likely cause of this issue?

NO.61 시뮬레이션
The network administrator has changed the IP address of ComputerA from 192.168.1.20 to 10.10.10.20 and now jane, a user, is unable to connect to file shares on ComputerA from ComputerB using the computer name.
지침
Using the available tools, resolve the connectivity issues.
After troubleshooting the issue, verify a successful connection.
If at any time you would like to bring back the initial state of the simulation? please click the Reset All button.

NO.62 A technician has assembled an ITX system with a modern processor, but the machine does not POST. The processor fan spins up, and the LEDs on the motherboard light up, but no beeps are emitted by the system.
Which of the following is the MOST likely cause of this issue?

NO.63 고객인 Ann은 두 대의 맞춤형 PC를 요청했는데, 하나는 게임용으로, 다른 하나는 비즈니스용 가상화 워크스테이션으로 사용하려고 합니다.
게임용 PC는 최신 게임과 게임 주변기기를 지원해야 합니다.
가상화 워크스테이션은 Ann의 홈 비즈니스의 일부로 여러 프로덕션 가상 머신을 호스팅할 수 있어야 합니다.
지침
상단의 탭을 사용하여 PC를 전환할 수 있습니다.
개체는 적절한 슬롯/디스플레이 영역에 배치해야 하며 한 번만 사용할 수 있습니다.
모든 슬롯/디스플레이 영역이 채워져야 합니다.
언제든지 시뮬레이션의 초기 상태로 되돌리려면 모두 초기화 버튼을 클릭하세요.

NO.64 Laura, a customer, has instructed you to configure her home office wireless access point.
She plans to use the wireless network for finances and has requested that the network be setup with the highest encryption possible.
Additionally, Laura knows that her neighbors have wireless networks and wants to ensure that her network is not being interfered with by the other networks.
She requests that the default settings be changed to the following.
Wireless Name: HomeWiFi
Shared Key: CompTIA
Router Password: Secure$1
Finally, Laura wants to ensure that only her laptop and Smartphone can connect to the network.
Laptop: IP Address 192.168.1.100
Hardware Address: 00:0A:BF:03:C4:54
Smartphone: IP Address 192.168.1.101
Hardware Address: 09:2C:D0:22:3F:11
지침
Configure Laura’s wireless network using the network adapter window.
If at any time you would like to bring back the initial state of the situation, please click the Reset All button.

NO.65 A user notices the system clock is changed every morning. The computer is shut down daily. A technician checks the time zone and finds it is correct, and then checks the BIOS settings and finds the time to be incorrect. Which of the following is MOST likely the problem?

NO.66 A technician is configuring a new desktop and wants to implement full disk encryption. When attempting this task, the technician gets an error stating the device cannot be encrypted. Which of the following does the technician need to enable so the drive can be encrypted?

NO.67 A technician received a call that the network printer was printing garbled text. The technician printed a test page from several users’ workstations and received the same result The technician then ran a diagnostic on the printer, and everything passed After uninstalling the printer from a user’s workstation and then reinstalling it.
the printer is now working properly Which of the following was the cause of this issue?