[Aug 09, 2026] New 2026 NETA NETA_2 Exam Dumps with PDF from Dumpleader (Updated 103 Questions) [Q58-Q82]

Q58. A transformer contains insulating fluid with aspecific gravity greater than 1. From where should the oil sample be drawn?

Q59. During avacuum circuit breaker bottle integrity test, which hazardous energy may be produced?

Q60. An analog ammeter has an accuracy of ±1% of full scale. If a reading is taken at25% of full scale, what is the accuracy of that measurement?

Q61. During aCT saturation test, voltage increases sharply with little increase in current. What does this indicate?

Q62. According to NETA standards, what is themaximum allowable timetest instruments may remain in service before requiring recalibration?

Q63. What is the purpose of ablow-out coilin a circuit breaker?

Q64. A digital multimeter (DMM), when set to measure voltage, typically has which type of input impedance?

Q65. An overcurrent relay is connected to a200:5 current transformerand has a pickup setting of4 A secondary.
Whatprimary currentwill cause the relay to operate?

Q66. Which of the following equations correctly represents the relationship betweencapacitance (C),charge (Q), andvoltage (V)?

Q67. What is theminimum oxygen concentrationallowed before entering a transformer or similar enclosed electrical space?

Q68. What effect does enablingthermal memoryhave on thelong-time delay (LTD)operation of a low-voltage digital overcurrent protective device?

Q69. When personnel are working in apermitted confined space, how many attendants must remain outside the space and for how long?

Q70. Sample valves should be flushed with at least how much waste liquid before collecting a transformer oil sample?

Q71. The sum of all voltage drops around aseries circuitis:

Q72. Duringprimary current injection testingof a low-voltage circuit breaker, the breaker trips instantaneously at
8× its long-time pickup setting, even though the instantaneous element is set to10×. What is the MOST likely cause?

Q73. A1500:5 multi-ratio CTproduces400 Vat the1200:5 tapduring saturation testing. What voltage is expected at the1500:5 tap?

Q74. Writethree thousand forty-eight ten-thousandthsin decimal form.

Q75. Each switchboard used asservice equipmentmust be provided with amain bonding jumper.

Q76. Secondary injection testing of a low-voltage air circuit breaker is:

Q77. On an electrical schematic, adot on a current transformer symbolindicates:

Q78. What is theRestricted Approach Boundaryfor a69 kVsystem?

Q79. Which document should be consultedfirstbefore performing any circuit breaker testing or maintenance?

Q80. When making a resistance measurement, which ohmmeter range should be selectedinitially?

Q81. A delta-connected load has aphase impedance of 12 #and is supplied from a480 V line-to-line source. What is theline current?

Q82. When reinstalling a draw-out circuit breaker into a metal-clad switchgear cubicle, in what condition must the breaker be?