Cisco 300-420 Practice Test Pdf Exam Material [Q32-Q54]

Q32. Which method will filter routes between EIGRP neighbors within the same autonomous system?

Q33. See the solution below
Explanation/Reference:
There are two ways to configure interVLAN routing in this case:
+ Use RouterC as a “router on a stick” and SwitchC as a pure Layer2 switch. Trunking must be established between RouterC and SwitchC.
+ Only use SwitchC for interVLAN routing without using RouterC, SwitchC should be configured as a Layer 3 switch (which supports ip routing function as a router). No trunking requires.
The question clearly states “No trunking has been configured on RouterC” so RouterC does not contribute to interVLAN routing of hosts H1 & H2 -> SwitchC must be configured as a Layer 3 switch with SVIs for interVLAN routing.
We should check the default gateways on H1 & H2. Click on H1 and H2 and type the “ipconfig” command to get their default gateways.

Q34. An engineer must design an in-band management solution for a customer with branch sites. The solution must allow remote management of the branch sites using management protocols over an MPLS WAN. Queueing is implemented at the remote sites using these classes:

How must the solution prioritize the management traffic over the WAN?

Q35. An architect must design an IPv6 migration solution for a corporation with remote offices to support:
– The customer has IPv4 peering with their service provider.
– IPv6 users need access to IPv4 and IPv6 resources.
– Existing content providers will migrate to IPv6 in the next two
years.
– Users will be migrated in a phase-by-phase approach.
Which migration solution must the architect choose?

Q36. An engineer is designing a PIM Anycast RP solution between two data centers. The design must ensure that RP1 in DC1 and RP2 in DC2 inform each other about specific sources that have joined locally. Which solution must the engineer choose?

Q37. Drag and drop the characteristics from the left onto the YANG models they describe on the right. Not all options are used.

Q38. Which two activities should occur during an SE’s discovery process? (Choose two.)

Q39. In Cisco SD-Access, virtual networks create segmentation that allows for separation of users and resources. How is this type of segmentation described?

Q40. Refer to the exhibit.

A network engineer must design a multicast solution based on:
* Many-to-many communications between the users and sources
* Support of up to 50 multicast sources
* Users that must register for steams
Which multicast solution must the engineer select?

Q41. In a multicast network, which condition must be met for an RPF check to be performed on the RP address ‘ ?

Q42. A network engineer must segregate three interconnected campus networks using IS-IS routing.
A two-layer hierarchy must be used to support large routing domains and to avoid more specific routes from each campus network being advertised to other campus network routers automatically.
Which two actions does the engineer take to accomplish this segregation? (Choose two.)

Q43. Which feature is used to optimize WAN bandwidth of IGMP network traffic among WAN Edge routers in the same VPN?

Q44. Refer to the exhibit. An engineer with an employee ID: 1234:56:789 must design a WoL deployment for a client, and the design must ensure that the Windows PCs are responsive to the WoL magic packets with no delays when the server-side initiates the instruction. Which action must the engineer choose?

Q45. Which component of Cisco SD-Access integrates with Cisco DNA Center to perform policy segmentation and enforcement through the use of security group access control lists and security group tags?

Q46. Drag and drop the properties from the left onto the protocols they describe on the right.

Q47. Refer to the exhibit.

A customer is running HSRP on the core routers. Over time the company has grown and requires more network capacity. In the current environment, some of the downstream interfaces are almost fully utilized, but others are not. Which solution improves the situation?

Q48. A network engineer prepares a script to configure a loopback interface with IP address
172.16.15.12/32. To comply with the company security policies, ‘Content-type’: ‘application/yang- data+json’ is added to the script. Connection to the network devices must be secured. Which code snippet must the network engineer use to meet this requirement?

Q49. Which control-plane technology allows the same subnet to exist across multiple network locations?

Q50. Drag and drop the descriptions from the left onto the corresponding VPN types on the rights.

Q51.

Refer to the exhibit. An engineer is designing a BGP solution for a client that peers with ISP1 for full Internet connectivity and with ISP2 for direct exchange of routes for several third parties. Which action, when implemented on the edge routers, enables the client network to reach the Internet through ISP1?

Q52. Which two overlay network design considerations must be made for a Cisco SD-Access network? (Choose two.)

Q53.

Refer to the exhibit. An architect must ensure a convergence time of 200 ms or less during a link failure within area 0. In addition, the solution must not impact the overall performance of the network. Which solution must the architect select?

Q54.

Refer to the exhibit. An architect must design a solution to connect the network behind R3 with the EIGRP network. Which mechanism should be included to avoid routing loops?