(2026) NACE-CIP2-001 Exam Dumps, Practice Test Questions BUNDLE PACK [Q11-Q31]

QUESTION 11
You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:

QUESTION 12
Coating surveys may include which steps?
Select All That Apply:

QUESTION 13
A failure caused by applying a coating too thinly is known as

QUESTION 14
When ASIN D 3363 is specified the Inspector must:

QUESTION 15
When performing an adhesion test in accordance with ASTM D 3359 where the Dry Film Thickness is approximately 10 mils, the Inspector should use:

QUESTION 16
When measuring the Dry Film Thickness Of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument is the:

QUESTION 17
NACE/SSPC Water Jetting standards are directly equivalent to ISO Abrasive Blast Standards:

QUESTION 18
You are a NACE Level 2 in-house inspector working in a shop. Your in-house requires you to perform a sleeve test to test for soluble salts; however the 3 rd party NACE Level 3 inspector, the owner, has a san smart meter and has achieved a very different result and has rejected the pre-cleaning.
Your FIRST course of action is to:

QUESTION 19
Generally for safety considerations, waterjetting hose connections use

QUESTION 20
Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?

QUESTION 21
When conducting inspections the Inspector should follow which standards:

QUESTION 22
NACE No.13/ SSPC 6 identifies the use of:

QUESTION 23
When using a destructive Paint Inspection Gauge the NACE inspector must:

QUESTION 24
It is always possible to see moisture on a steel substrate:

QUESTION 25
The coating applicator has ignored a enface preparation hold point and applied coating over the surface without a sign off from you as the inspector.
Your FIRST preferred course of action is to:

QUESTION 26
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:

QUESTION 27
Which surface preparation method uses a dilute acid solution to remove laitance and I roughen the concrete surface?

QUESTION 28
You can use magnifiers to examine all of the following EXCEPT

QUESTION 29
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires

QUESTION 30
Coating application to concrete substrates is:

QUESTION 31
Which product, is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?