New 2026 Realistic Free Fortinet FCP_FAZ_AN-7.6 Exam Dump Questions & Answer [Q29-Q52]

5/5 - (1 투표)

New 2026 Realistic Free Fortinet FCP_FAZ_AN-7.6 Exam Dump Questions and Answer

FCP_FAZ_AN-7.6 Practice Test Engine: Try These 81 Exam Questions

Fortinet FCP_FAZ_AN-7.6 Exam Overview:

Certification Vendor:	포티넷
Exam Name:	FCP – FortiAnalyzer 7.6 Analyst
Exam Number:	FCP_FAZ_AN-7.6
Passing Score:	Pass/Fail
Related Certifications:	Fortinet Certified Professional – Security Operations NSE 5 Network Security Analyst
Certificate Validity Period:	2 years
Available Languages:	영어
Exam Price:	$200 USD
Real Exam Qty:	30–35
Exam Duration:	65 minutes
Exam Format:	Multiple-choice, Scenario-based
Recommended Training:	Fortinet Training: FortiAnalyzer 7.6 Analyst
Exam Registration:	Pearson VUE Registration
샘플 질문:	Fortinet FCP_FAZ_AN-7.6 Sample Questions
Exam Way:	Online proctored or onsite at Pearson VUE test centers
Pre Condition:	6–12 months hands-on experience with FortiGate and FortiAnalyzer recommended; no mandatory prerequisites
Official Syllabus URL:	https://training.fortinet.com/local/staticpage/view.php?page=fcp_security_operations

새 질문 29
As part of your analysis, you discover that a Medium severity level incident is fully remediated.
You change the incident status to Closed: Remediated.
Which statement about your update is true?

The incident can no longer be deleted.

The corresponding event will be marked as Mitigated.

The incident dashboard will be updated.

The incident severity will be lowered.

새 질문 30
Which statement about SQL SELECT queries is true?

They can be used to purge log entries from the database.

They must be followed immediately by a WHERE clause.

They can be used to display the database schema.

They are not used in macros.

새 질문 31
(Refer to the exhibit.

Which two observations can you make after reviewing this log entry? (Choose two answers))

This is a normalized log.

This is a formatted view of the log.

This is the original log that FortiAnalyzer received from FortiGate.

This log is in a raw log format.

새 질문 32
You are trying to configure a task in the playbook editor to run a report.
However, when you try to select the desired playbook, you do to see it listed.
What is the reason?

The report does not have auto-cache and extended log filtering enabled.

The playbook is currently running and will be available after it is finished.

You must create a trigger to run the report first.

The report has no result and must be reconfigured.

새 질문 33
You need to move reports between two ADOMs.
다음 중 어느 것이 사실입니까? (두 개를 선택하세요.)

The ADOMs must be compatible types.

The date and time will be appended to the original report name to avoid conflicts.

All charts and datasets associated with the report will be imported together.

You need to convert the reports into templates first.

새 질문 34
What are two effects of enabling auto-cache in a FortiAnalyzer report? (Choose two.)

The generation time for reports is decreased.

When new logs are received, the hard-cache data is updated automatically.

FortiAnalyzer local cache is used to store generated reports.

The size of newly generated reports is optimized to conserve disk space.

새 질문 35
전시.

Based on the partial outputs displayed, which devices can be members of a FotiAnalyzer Fabric?

FortiAnalayzer1 and FortiAnalyzer3

FortiAnalyzer1 and FortiAnalyzer2

FortiAnalyzer2 and FortiAnalyzer3

All devices listed can be members.

새 질문 36
Which log will generate an event with the status Unhandled?

An AV log with action=quarantine.

An IPS log with action=pass.

A WebFilter log with action=dropped.

An AppControl log with action=blocked.

새 질문 37
전시회를 참조하세요.

An analyst is trying to create a dataset to pull all gambling websites that were visited by end users.
Which SQL query on FortiAnalyzer will give the result shown in the exhibit?

[Selected] select srcip as “SourceIP”, dstip as “DestIP”, url from $log where catdesc = ‘Gambling’

select srcip as “SourceIPv6”, dstip as “DestIPv6”, url from $log where catdesc = ‘Gambling’

select srcip as “SourceIP”, dstip as “DestIP”, url from $log where catdesc = ‘Dating’

select srcip as “SourceIP”, dstip as “DestIP”, url from ‘Gambling’ where catdesc = $log

새 질문 38
In firmware version 7.6, how does on-premises FortiAnalyzer store logs? (Choose one answer)

Uses ClickHouse database

Uses MySQL database

Uses Postgres SQL database

Uses Elasticsearch database

새 질문 39
After a generated a repot, you notice the information you were expecting to see in not included in it. However, you confirm that the logs are there:
Which two actions should you perform? (Choose two.)

Check the time frame covered by the report.

Disable auto-cache.

Increase the report utilization quota.

Test the dataset.

When a generated report does not include the expected information despite the logs being present, there are several factors to check to ensure accurate data representation in the report.
* Option A – Check the Time Frame Covered by the Report:
* Reports are generated based on a specified time frame. If the time frame does not encompass the period when the relevant logs were collected, those logs will not appear in the report. Ensuring the time frame is correctly set to cover the intended logs is crucial for accurate report content.
* Conclusion: Correct.
* Option B – Disable Auto-Cache:
* Auto-cache is a feature in FortiAnalyzer that helps optimize report generation by using cached data for frequently used datasets. Disabling auto-cache is generally not necessary unless there is an issue with outdated data being used. In most cases, it does not directly impact whether certain logs are included in a report.
* Conclusion: Incorrect.
* Option C – Increase the Report Utilization Quota:
* The report utilization quota controls the resource limits for generating reports. While insufficient quota might prevent a report from generating or completing, it does not typically cause specific log entries to be missing. Therefore, this option is not directly relevant to missing data within the report.
* Conclusion: Incorrect.
* Option D – Test the Dataset:
* Datasets in FortiAnalyzer define which logs and fields are pulled into the report. If a dataset is misconfigured, it could exclude certain logs. Testing the dataset helps verify that the correct data is being pulled and that all required logs are included in the report parameters.
* Conclusion: Correct.
결론:
* Correct Answer: A. Check the time frame covered by the report and D. Test the dataset.
* These actions directly address the issues that could cause missing information in a report when logs are available but not displayed.
참조:
FortiAnalyzer 7.4.1 documentation on report generation settings, time frames, and dataset configuration.

새 질문 40
Which statement about exporting items in Report Definitions is true?

Templates can be exported.

Template exports contain associated charts and datasets.

Chart exports contain associated datasets.

Datasets can be exported.

새 질문 41
Refer to Exhibit. Client-1 is trying to access the internet for web browsing. All FortiGate devices in the topology are part of a Security Fabric with logging to FortiAnalyzer configured. All firewall policies have logging enabled. All web filter profiles are configured to log only violations.
Which statement about the logging behavior for this specific traffic flow is true?

Only FGT-B will create traffic logs.

FGT-B will see the MAC address of FGT-A as the destination and notifies FGT-A to log this flow.

FGT B will create traffic logs and will create web filter logs if it detects a violation.

Only FGT-A will create web filter logs if it detects a violation.

새 질문 42
You discover that a few reports are taking a long time to generate.
Which two steps can you take to troubleshoot? (Choose two.)

Remove old reports from the hcache

Enable auto-cache and run the reports again

Increase the ADOM reports quota

Review report diagnostics

새 질문 43
After generating a report, you notice the information you were expecting to see is not included in it. However, you confirm that the logs are there.
Which two actions should you perform? (Choose two.)

Check the time frame covered by the report.

Disable auto-cache.

Increase the report utilization quota.

Test the dataset.

새 질문 44
What is the main purpose of deploying RAID with FortiAnalyzer?

To provide redundancy of your log data

To store data in chunks across multiple drives

To make an identical copy of log data on two separate physical drives

To back up your logs

새 질문 45
When managing incidents on FortiAnlyzer, what must an analyst be aware of?

You can manually attach generated reports to incidents.

The status of the incident is always linked to the status of the attach event.

Severity incidents rated with the level High have an initial service-level agreement (SLA) response time of 1 hour.

Incidents must be acknowledged before they can be analyzed.

In FortiAnalyzer’s incident management system, analysts have the option to manually manage incidents, which includes attaching relevant reports to an incident for further investigation and documentation. This feature allows analysts to consolidate information, such as detailed reports on suspicious activity, into an incident record, providing a comprehensive view for incident response.
Let’s review the other options to clarify why they are incorrect:
* Option A: You can manually attach generated reports to incidents
* This is correct. FortiAnalyzer allows analysts to manually attach reports to incidents, which is beneficial for providing additional context, evidence, or analysis related to the incident. This functionality is part of the incident management process and helps streamline information for tracking and resolution.
* Option B: The status of the incident is always linked to the status of the attached event
* This is incorrect. The status of an incident on FortiAnalyzer is managed independently of the status of any attached events. An incident can contain multiple events, each with different statuses, but the incident itself is tracked separately.
* Option C: Severity incidents rated with the level High have an initial service-level agreement (SLA) response time of 1 hour
* This is incorrect. While incidents have severity levels, specific SLA response times are typically set according to the organization’s incident response policy, and FortiAnalyzer does not impose a default SLA response time of 1 hour for high-severity incidents.
* Option D: Incidents must be acknowledged before they can be analyzed
* This is incorrect. Incidents on FortiAnalyzer can be analyzed even if they are not yet acknowledged. Acknowledging an incident is often part of the workflow to mark it as being actively addressed, but it is not a prerequisite for analysis.
* According to FortiAnalyzer documentation, analysts can attach reports to incidents manually, making option A correct. This feature enables better tracking and documentation within the incident management system on FortiAnalyzer.

새 질문 46
전시회를 참조하세요.

What conclusion can you draw from the exhibit?

These are application control logs from FortiGate

Social networking websites are being allowed

Unrated websites are being blocked.

This is a custom view that was set by the analyst

새 질문 47
As part of your analysis, you discover that an incident is a false positive.
You change the incident status to Closed: False Positive.
Which statement about your update is true?

The audit history log will be updated.

The corresponding event will be marked as mitigated.

The incident will be deleted.

The incident number will be changed

새로운 질문 48
Which SQL query is in the correct order to query the database in the FortiAnalyzer?

SELECT devid FROM $log GROUP BY devid WHERE ‘user’,,’ users1′

SELECT FROM $log WHERE devid ‘user’,, USER1′ GROUP BY devid

SELCT devid WHERE ‘user’-‘ USER1’ FROM $log GROUP By devid

SELECT devid FROM $log WHERE ‘user’=’ GROUP BY devid

새 질문 49
Refer to the exhibit. What can you conclude about these search results? (Choose two.)

The logs have been parsed by FortiGate log parser.

They were searched using text mode.

They are sortable by columns and customizable.

They can be downloaded to a CSV file.

새 질문 50
Which statement about the FortiSIEM management extension is correct?

It allows you to manage the entire life cycle of a threat or breach.

It can be installed as a dedicated VM.

Its use of the available disk space is capped at 50%.

It requires a licensed FortiSIEM supervisor.

새 질문 51
What is the purpose of playbook trigger variables?

To display statistics about the playbook runtime

To use information from the trigger to filter the action in a task

To provide the trigger information to make the playbook start running

To store the start the times of playbooks with On_Schedule triggers

새 질문 52
전시.

What can you conclude from this output?

There is not disk quota allocated to quarantining files.

FGT_B is the Security Fabric root.

The allocated disk quote to ADOM1 is 3 GB.

Archive logs are using more space than analytic logs.

Fortinet FCP_FAZ_AN-7.6 Exam Syllabus Topics:

주제	세부 정보
주제 1	Features and concepts: This domain covers FortiAnalyzer’s integration with Security Fabric for log collection, the technical processes of log data flow, normalization and parsing, and the SOC features available for security monitoring and analysis.
주제 2	Log Analysis: This domain focuses on examining and interpreting logs, events, and incidents, using FortiView dashboards and widgets for data visualization, and diagnosing report generation issues.
주제 3	Reports: This domain explains the use of reports, charts, and datasets for presenting security intelligence, covers report configuration to meet organizational requirements, and includes troubleshooting report generation problems.
주제 4	SOC operation and automation: This domain addresses configuring events and event handlers, setting up incidents and indicators for threat tracking, configuring playbooks and fabric automation for orchestrated responses, and troubleshooting automation workflow issues.